Airtac SC100 Standard Cylinder SC100X160TC
The AirTAC Airtac SC100 Standard Cylinder SC100X160TC is a genuine double-acting standard air cylinder with a Ø100mm bore and 160mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke160 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X160TC
The SC100X160TC is a double-acting pneumatic cylinder delivering a substantial 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa). Its 100 mm bore and 160 mm stroke suit medium-travel clamping, pressing, and lifting tasks where a compact tie-rod body is preferred.
This model includes a TC centre trunnion mount (supplied with TCM1 bracket, order code F-SC100TC), allowing the cylinder to pivot during operation. The 25 mm diameter piston rod and 29 mm adjustable air cushion provide smooth end-of-stroke deceleration for consistent cycle rates.
Airtac SC100 Standard Cylinder SC100X160TC Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X160TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X160TC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X160TC Is Used
Conveyor Diverters
Pivots a gate or diverter arm on a packaging line. The TC trunnion mount allows the cylinder body to swing as it extends and retracts.
Clamp & Press Fixtures
Applies 3927 N of clamping force at standard line pressure. The adjustable cushion protects tooling from impact at the end of the 160 mm stroke.
Material Lift Tables
Raises or tilts a platform in a workstation. The centre trunnion provides a fixed pivot point, simplifying the mechanical linkage design.
Is the Airtac SC100 Standard Cylinder SC100X160TC the Right Cylinder?
For higher force, step up to the SC125 bore (6136 N at 0.5 MPa); for a lighter, faster actuator, the SC80 bore offers 2513 N. The TC trunnion mount is ideal for swinging or pivoting loads—ensure the pivot axis is perpendicular to the rod to avoid binding.
At 160 mm stroke, side-load risk is moderate. Always guide the load externally if lateral forces are present; the tie-rod construction is not designed to absorb bending moments. When replacing, match bore (100 mm), stroke (160 mm), PT port thread, TC mount with TCM1 bracket, and confirm magnet requirement (this model has no built-in magnet).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X160TC FAQ
At 0.5 MPa, it produces 3927 N pushing and 3681 N pulling. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The SC series is a tie-rod cylinder and is physically shorter than an ISO 15552 profile cylinder. It is not dimensionally interchangeable with ISO 15552 mounts. Replace only with another AirTAC SC100 of matching stroke, port, and TC mount.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X160TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.