This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAI100BX195S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SI100 Standard Cylinder SI100BX195S
The AirTAC Airtac SI100 Standard Cylinder SI100BX195S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø100mm bore and 195mm stroke, G1/2 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAI100BX195S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke195 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAI100BX195S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SI100 Standard Cylinder SI100BX195S
The AirTAC SI100BX195S is a discontinued double-acting ISO 15552 profile cylinder with a 100mm bore and 195mm stroke. It delivers 3927 N push force at 0.5 MPa via a G1/2 port. The direct replacement is the SAI100BX195S, matching the interface, stroke, force, and mounting.
The SAI upgrade features a two Y-shaped one-way piston seal for low start-up pressure and long life. This -B variant has a SUS304 stainless rod, and the -S magnet works with CS1-B/DS1-B sensors.
Airtac SI100 Standard Cylinder SI100BX195S Technical Specifications
| Model | Airtac SI100 Standard Cylinder SI100BX195S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAI100BX195S |
| Bore size | Ø100 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAI100BX195S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The SAI100BX195S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SI100 Standard Cylinder SI100BX195S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SI100 Standard Cylinder SI100BX195S Is Used
Heavy-Duty Pressing
Applies up to 5497 N at 0.7 MPa for seating bearings and forming heavy components on automated lines.
Logistics Diverters
Actuates heavy lane diverters and sorting gates where a robust 25mm rod resists side deflection.
Replacing the Airtac SI100 Standard Cylinder SI100BX195S with the SAI100BX195S
To replace the SI100BX195S, order the SAI100BX195S. Confirm the ISO 15552 mounting interface, 100mm bore, 195mm stroke, G1/2 port (PT/G/NPT), and mounting accessory. The -S magnet enables current AirTAC switches (legacy used CS1-B/DS1-B), while the -B rod is SUS304 stainless. For sizing, neighboring bores (80mm/125mm) offer different footprints; at 0.5 MPa this 100mm bore yields 3927 N push and 3681 N pull. A plain cylinder drifts on air loss—the cushion only decelerates—so for load holding use an external rod lock, pilot check valve, or the SAIL/BSAI lock variants.
Replacement checklist
- ✓ Same ISO 15552 interface → SAI100BX195S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SI100 Standard Cylinder SI100BX195S FAQ
Yes, the SI100BX195S is discontinued. The direct replacement is the SAI100BX195S. It is dimensionally interchangeable per ISO 15552, matching the 100mm bore, 195mm stroke, G1/2 port, and mounting fixtures.
This double-acting cylinder has a G1/2 port. It generates 3927 N push and 3681 N pull at 0.5 MPa, 5497 N push at 0.7 MPa, 7068 N at 0.9 MPa, and a theoretical max of 801 kgf at 1.0 MPa.
Related AirTAC SAI Cylinders
Request a Quote for the SAI100BX195S
Send us the quantity and destination. We confirm price, stock and lead time on the SAI100BX195S replacement — usually within 7-8 hours.