This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAI200X100, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SI200 Standard Cylinder SI200X100
The AirTAC Airtac SI200 Standard Cylinder SI200X100 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø200mm bore and 100mm stroke, G3/4 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAI200X100, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ200 mm
- Stroke100 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- StatusDiscontinued → SAI200X100
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SI200 Standard Cylinder SI200X100
The AirTAC SI200X100 is a discontinued double-acting ISO 15552 profile cylinder with a 200 mm bore and 100 mm stroke. It delivers 15708 N push force at 0.5 MPa through a G3/4 port. The direct replacement is the SAI200X100, matching the interface, bore, stroke, force, port and mounting.
This SAI upgrade introduces a two Y-shaped one-way piston seal for low start-up pressure and long life. Note this SKU lacks a magnet, so it cannot take a CS1-B/DS1-B sensor.
Airtac SI200 Standard Cylinder SI200X100 Technical Specifications
| Model | Airtac SI200 Standard Cylinder SI200X100 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAI200X100 |
| Bore size | Ø200 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAI200X100 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
The SAI200X100 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SI200 Standard Cylinder SI200X100
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 200 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SI200 Standard Cylinder SI200X100 Is Used
Heavy Pressing
Drives large stamping and forming presses requiring 15708 N of push force at 0.5 MPa.
Pallet Lifting
Lifts heavy pallets or chassis components vertically, safely handling loads around 801 kg.
Industrial Clamping
Secures massive fabricated steel structures during welding or machining operations.
Replacing the Airtac SI200 Standard Cylinder SI200X100 with the SAI200X100
To replace the SI200X100, order the SAI200X100. Confirm the ISO 15552 mounting interface, M36x2 rod thread, 50 mm cushion and G3/4 port. This non-magnet SKU cannot accept a sensor. For sizing, the 160 mm bore yields 10053 N push at 0.5 MPa, while the 200 mm bore reaches 21991 N at 0.7 MPa. The air cushion only decelerates; it does not hold load on air loss. For load holding, use an external rod lock, pilot check valve, or the SAIL/BSAI lock variants. The SAI family also adds the SAIF valve variant for smaller bores.
Replacement checklist
- ✓ Same ISO 15552 interface → SAI200X100
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SI200 Standard Cylinder SI200X100 FAQ
Yes, the AirTAC SI200X100 is discontinued. The direct replacement is the SAI200X100. It is dimensionally interchangeable per ISO 15552, matching the 200 mm bore, 100 mm stroke, G3/4 port, and mounting fixtures perfectly.
This double-acting cylinder uses a G3/4 port. It delivers 15708 N push and 15080 N pull at 0.5 MPa, 21991 N push at 0.7 MPa, and a theoretical max of 3204 kgf at 1.0 MPa. Operating speed is 30-500 mm/s.
Related AirTAC SAI Cylinders
Request a Quote for the SAI200X100
Send us the quantity and destination. We confirm price, stock and lead time on the SAI200X100 replacement — usually within 7-8 hours.