This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAI63X200S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SI63 Standard Cylinder SI63X200S
The AirTAC Airtac SI63 Standard Cylinder SI63X200S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø63mm bore and 200mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAI63X200S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ63 mm
- Stroke200 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → SAI63X200S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SI63 Standard Cylinder SI63X200S
The AirTAC SI63X200S is a discontinued double-acting ISO 15552 profile cylinder with a 63mm bore and 200mm stroke. Delivering 1559N push force at 0.5MPa through a G3/8 port, it is replaced by the SAI63X200S. This direct successor matches the exact ISO 15552 mounting interface, bore, stroke, force, and port size.
The SAI upgrade features a two Y-shaped one-way piston seal for low start-up pressure and long life. The SAI family also adds SAIL, SAIF, and BSAI lock variants the SI lacked. Your -S magnet works with legacy CS1-B/DS1-B sensors.
Airtac SI63 Standard Cylinder SI63X200S Technical Specifications
| Model | Airtac SI63 Standard Cylinder SI63X200S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAI63X200S |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAI63X200S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
The SAI63X200S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SI63 Standard Cylinder SI63X200S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SI63 Standard Cylinder SI63X200S Is Used
Mid-Tonnage Pressing
Applies the 1559N push force at 0.5MPa for seating bearings or light stamping tasks within automated machinery.
Package Diversion
Uses the 200mm stroke to push cartons off a main conveyor belt line reliably at speeds up to 800mm/s.
Replacing the Airtac SI63 Standard Cylinder SI63X200S with the SAI63X200S
To replace the SI63X200S, order the SAI63X200S. Confirm the ISO 15552 mounting interface, 63mm bore, 200mm stroke, G3/8 port, and your -S magnet. Sizing both ways: a 50mm bore yields 982N push at 0.5MPa, while an 80mm bore yields 2513N. Note that a plain cylinder drifts on air loss; the cushion only decelerates. For load holding, use an external rod lock, pilot check valve, or the SAIL/BSAI lock variant.
Replacement checklist
- ✓ Same ISO 15552 interface → SAI63X200S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SI63 Standard Cylinder SI63X200S FAQ
Yes, the SI63X200S is discontinued. The direct replacement is the SAI63X200S. It shares the same ISO 15552 mounting interface, 63mm bore, 200mm stroke, output force, and G3/8 port, fitting existing fixtures perfectly.
This double-acting cylinder has a G3/8 port. It delivers 1559N push and 1402N pull at 0.5MPa, 2182N push at 0.7MPa, 2805N push at 0.9MPa, and a theoretical max of 318kgf at 1.0MPa.
Related AirTAC SAI Cylinders
Request a Quote for the SAI63X200S
Send us the quantity and destination. We confirm price, stock and lead time on the SAI63X200S replacement — usually within 7-8 hours.