This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAU32X130, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SU32~50 Standard Cylinder SU32X130
The AirTAC Airtac SU32~50 Standard Cylinder SU32X130 is a double-acting profile-type standard cylinder with a Ø32mm bore and 130mm stroke, 1/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAU32X130, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke130 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAU32X130
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SU32~50 Standard Cylinder SU32X130
The AirTAC SU32X130 is a discontinued double-acting profile-type cylinder with a 32 mm bore and 130 mm stroke. It delivers 402 N push force at 0.5 MPa through a 1/8" port. AirTAC replaced this unit with the SAU32X130, a direct alternative retaining the exact bore, stroke, output force, and SC-series mounting footprint.
Because this is a non-magnet SKU, it cannot accept a sensor. The SAU upgrade introduces CMSG/DMSG/EMSG switch compatibility for magnetized versions, plus a SAUF built-in valve option the SU line lacked.
Airtac SU32~50 Standard Cylinder SU32X130 Technical Specifications
| Model | Airtac SU32~50 Standard Cylinder SU32X130 |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAU32X130 |
| Bore size | Ø32 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAU32X130 carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAU32X130 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SU32~50 Standard Cylinder SU32X130
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SU32~50 Standard Cylinder SU32X130 Is Used
Small Part Ejection
Uses the 402 N push force at 0.5 MPa to reliably push lightweight machined components out of a fixture.
Package Diverting
Executes 130 mm strokes to divert small cartons on a line, operating smoothly at 30-800 mm/s.
Replacing the Airtac SU32~50 Standard Cylinder SU32X130 with the SAU32X130
To replace the SU32X130, order the SAU32X130. Verify your 1/8" port thread (PT, G, or NPT), M10x1.25 rod end, and SC-series mounting. Since this SKU lacks a magnet, it cannot hold a sensor; if you need position detection, upgrade to an -S SAU model and switch to CMSG/DMSG/EMSG switches. A plain cylinder drifts on air loss, so use an external rod lock for held loads. At 130 mm stroke, rod bending is low, but if moving up to a 40 mm bore for higher force (628 N push at 0.5 MPa), ensure your guide can handle the side loads.
Replacement checklist
- ✓ Same bore / stroke → SAU32X130
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SU32~50 Standard Cylinder SU32X130 FAQ
Yes, the SU32X130 is discontinued. The direct replacement is the AirTAC SAU32X130. It shares the identical 32 mm bore, 130 mm stroke, 1/8" port, and SC-series mounting, so no mechanical changes are needed.
It provides 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a max of 82 kgf at 1.0 MPa. This specific SKU has no magnet, so it cannot accept sensors; magnetized SAU replacements use CMSG/DMSG/EMSG switches.
Request a Quote for the SAU32X130
Send us the quantity and destination. We confirm price, stock and lead time on the SAU32X130 replacement — usually within 7-8 hours.