This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAU63X130, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SU63-100 Standard Cylinder SU63X130
The AirTAC Airtac SU63-100 Standard Cylinder SU63X130 is a double-acting profile-type standard cylinder with a Ø63mm bore and 130mm stroke, 3/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAU63X130, which matches its bore, stroke, force and mounting.
- BoreØ63 mm
- Stroke130 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → SAU63X130
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SU63-100 Standard Cylinder SU63X130
The AirTAC SU63X130 is a discontinued double-acting profile cylinder with a 63mm bore and 130mm stroke. It delivers 1559N push and 1402N pull at 0.5MPa via a 3/8 port. The direct replacement is the SAU63X130, matching the body, force, stroke, and SC-series mounting.
The SAU upgrade introduces CMSG/DMSG/EMSG sensors and a SAUF valve-integrated option the SU lacked. This non-magnet SKU cannot take a switch. Note that cushions only decelerate; use an external rod lock to hold loads.
Airtac SU63-100 Standard Cylinder SU63X130 Technical Specifications
| Model | Airtac SU63-100 Standard Cylinder SU63X130 |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAU63X130 |
| Bore size | Ø63 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAU63X130 carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
The SAU63X130 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SU63-100 Standard Cylinder SU63X130
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SU63-100 Standard Cylinder SU63X130 Is Used
Package Diverting
Pushes medium-heavy cartons off a main belt line using the 1559N push force at 0.5MPa, with the 130mm stroke clearing guide rails cleanly.
Clamp Actuation
Secures metal workpieces in a machining fixture, providing reliable 1402N pull force at 0.5MPa to hold parts against cutting vibration.
Pallet Stops
Acts as a pneumatic stop for incoming pallets on roller conveyors, absorbing kinetic energy via the 21mm adjustable air cushions.
Replacing the Airtac SU63-100 Standard Cylinder SU63X130 with the SAU63X130
To replace the SU63X130, order the SAU63X130, confirming the 3/8 port, M16x1.5 rod thread, and SC-series mounts. This non-magnet SKU cannot accept a sensor. Sizing both ways: a 50mm bore gives 982N [email protected], while an 80mm bore yields 2513N. The cushion only decelerates; use a pilot-operated check valve for load holding. If you need self-switching, explore the SAUF variant with a built-in valve.
Replacement checklist
- ✓ Same bore / stroke → SAU63X130
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SU63-100 Standard Cylinder SU63X130 FAQ
Yes, the SU63X130 is discontinued. The direct replacement is the SAU63X130. It shares the exact same 63mm bore, 130mm stroke, 3/8 port, output force, and SC-series mounting accessories, so it fits the same application directly.
It delivers 1559N push and 1402N pull at 0.5MPa, 2182N push at 0.7MPa, 2805N at 0.9MPa, and a 318kgf max at 1.0MPa. This specific non-magnet SKU cannot accept a sensor. If sensing is required, the SAU63X130 replacement uses CMSG/DMSG/EMSG switches.
Request a Quote for the SAU63X130
Send us the quantity and destination. We confirm price, stock and lead time on the SAU63X130 replacement — usually within 7-8 hours.