This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAUJ32X30-10S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ32X30-10S
The AirTAC Airtac SUJ Adjustable Cylinder SUJ32X30-10S is a double-acting profile-type standard cylinder with a Ø32mm bore and 30mm stroke, 1/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAUJ32X30-10S, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke30 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAUJ32X30-10S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ32X30-10S
The AirTAC SUJ32X30-10S is a double-acting, double-rod profile cylinder with an external stop screw that lets you trim the extend stroke by up to 10 mm on-site, yielding a usable 20-30 mm extend range from the 30 mm nominal maximum. The stop screw sets the end position but is not a load lock. It uses a 12 mm rod with an M10x1.25 thread and 21 mm adjustable cushions.
The direct replacement is the SAUJ32X30-10S, which matches the bore, stroke, force, port, and FA/LB mounting. Upgrading to the SAUJ profile body allows the use of current CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B switches used here. A plain cylinder drifts on air loss; use an external rod lock for held loads.
Airtac SUJ Adjustable Cylinder SUJ32X30-10S Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ32X30-10S |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ32X30-10S |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ32X30-10S carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAUJ32X30-10S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ32X30-10S
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ32X30-10S Is Used
Short-Stroke Clamping
Trimming the extend stroke by up to 10 mm on-site allows precise clamping of varying part thicknesses without re-engineering the entire fixture.
Divertor Gate Tuning
Field-adjusting the 20-30 mm extend stop lets operators dial in the exact gate opening height required for different package sizes on the line.
Compact Part Ejection
The short profile barrel and adjustable end-position screw provide tight ejection timing in dense machinery where fixed-stroke cylinders lack flexibility.
Replacing the Airtac SUJ Adjustable Cylinder SUJ32X30-10S with the SAUJ32X30-10S
To replace this discontinued SUJ32X30-10S, order the exact direct replacement SAUJ32X30-10S (bore, stroke, 10 mm adjust window, 1/8" port, and FA/LB mounting remain identical). Choose the 10 mm adjust window if you need to fine-tune the extend end position on-site. Because this unit has the -S magnet, you must switch to CMSG/DMSG/EMSG sensors on the SAUJ (the SUJ used CS1-B/DS1-B). Since the 30 mm stroke is under 300 mm, side-load leverage is minimal. Remember the adjust stop sets position but does not lock the load; add an external rod lock for holding.
Replacement checklist
- ✓ Same bore / stroke → SAUJ32X30-10S
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ32X30-10S FAQ
Yes, the AirTAC SUJ32X30-10S is discontinued. The direct replacement is the SAUJ32X30-10S, which matches the 32 mm bore, 30 mm nominal stroke, 10 mm adjust window, 1/8" port, and FA/LB mounting. You will need to upgrade your sensors from the legacy CS1-B/DS1-B to the current CMSG/DMSG/EMSG switches.
The external stop screw provides a 10 mm adjust window, allowing you to shorten the 30 mm maximum extend stroke down to 20 mm on-site. The stop sets end position and is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ32X30-10S
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ32X30-10S replacement — usually within 7-8 hours.