This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAUJ63X100-10, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ63X100-10
The AirTAC Airtac SUJ Adjustable Cylinder SUJ63X100-10 is a double-acting profile-type standard cylinder with a Ø63mm bore and 100mm stroke, 3/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAUJ63X100-10, which matches its bore, stroke, force and mounting.
- BoreØ63 mm
- Stroke100 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → SAUJ63X100-10
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ63X100-10
The AirTAC SUJ63X100-10 is a double-acting double-rod profile cylinder with a 63mm bore and 100mm nominal stroke. An external stop screw lets you trim the extend stroke by up to 10mm on-site, yielding a usable 90-100mm end position. The stop sets the end position but is not a load lock.
The direct replacement is the SAUJ63X100-10, matching the bore, stroke, force, port, and FA/LB mounting. Upgrading to the SAUJ moves you to current CMSG/DMSG/EMSG sensors from the legacy CS1-B/DS1-B. Note this non-magnetic SKU cannot take a switch, and a plain cylinder drifts on air loss, requiring an external rod lock for held loads.
Airtac SUJ Adjustable Cylinder SUJ63X100-10 Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ63X100-10 |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ63X100-10 |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ63X100-10 carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
The SAUJ63X100-10 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ63X100-10
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ63X100-10 Is Used
Diverter Gate Positioning
Trimming the 100mm extend stroke by up to 10mm on-site allows precise gate alignment without machining spacers.
Package Stopper Height
Field-tuning the extend end position accommodates varying carton sizes on a 3/8" ported pneumatic line.
Replacing the Airtac SUJ Adjustable Cylinder SUJ63X100-10 with the SAUJ63X100-10
To replace this discontinued SUJ63X100-10, order the SAUJ63X100-10 direct, which preserves the 3/8" port, M16x1.5 rod thread, and 21mm cushions. Choose the 10mm adjust window when you need precise 90-100mm extend tuning. Retain FA or LB mounts, and since this is a non-magnetic SKU, you cannot fit a switch. For strokes of 300mm or longer, verify side-load limits. The stop screw sets end position only; use an external rod lock for load holding.
Replacement checklist
- ✓ Same bore / stroke → SAUJ63X100-10
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ63X100-10 FAQ
Yes, the SUJ63X100-10 is discontinued. The direct replacement is the SAUJ63X100-10, matching the 63mm bore, 100mm stroke, 3/8" port, and FA/LB mounting. The SAUJ uses current CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B.
The external stop screw trims the extend stroke by up to 10mm on-site, giving a 90-100mm usable window. The stop sets end position and is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ63X100-10
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ63X100-10 replacement — usually within 7-8 hours.