This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAUJ63X100-30H, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ63X100-30H
The AirTAC Airtac SUJ Adjustable Cylinder SUJ63X100-30H is a double-acting profile-type standard cylinder with a Ø63mm bore and 100mm stroke, 3/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAUJ63X100-30H, which matches its bore, stroke, force and mounting.
- BoreØ63 mm
- Stroke100 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → SAUJ63X100-30H
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ63X100-30H
The AirTAC SUJ63X100-30H is a discontinued double-acting double-rod profile cylinder featuring an external stop screw that lets you trim the extend stroke by up to 30 mm on-site, yielding a usable 70-100 mm extend out of the 100 mm nominal maximum. This high-temp variant uses Viton H seals for 0-150 C operation. Because this SKU lacks a magnet, it cannot accept a magnetic switch for position sensing.
As the SUJ line is end-of-life, the direct replacement is the SAUJ63X100-30H, which preserves the 63 mm bore, 100 mm stroke, 30 mm adjust window, force, and FA/LB mounting. The SAUJ upgrade transitions to current CMSG/DMSG/EMSG sensors (this legacy unit used CS1-B/DS1-B) and offers the SAUF built-in-valve variant. The stop screw sets the end position but is not a load lock; a plain cylinder drifts on air loss, so use an external rod lock for held loads.
Airtac SUJ Adjustable Cylinder SUJ63X100-30H Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ63X100-30H |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ63X100-30H |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ63X100-30H carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
The SAUJ63X100-30H produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ63X100-30H
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ63X100-30H Is Used
Heat Chamber Ejector
Deploying the Viton H high-temp seals in a 150 C oven to eject parts, using the 30 mm adjust screw to dial in the exact 85 mm extend position without re-engineering the fixture.
Variable-Length Clamping
Clamping castings on a machining line where the 100 mm nominal stroke is shortened on-site by up to 30 mm to accommodate different raw blank widths quickly.
Replacing the Airtac SUJ Adjustable Cylinder SUJ63X100-30H with the SAUJ63X100-30H
To replace the discontinued SUJ63X100-30H, specify the SAUJ63X100-30H direct, ensuring you migrate from legacy CS1-B/DS1-B to current CMSG/DMSG/EMSG sensors. Choose the 30 mm adjust window if your fixture requires field-tuning the extend stroke down to 70 mm. Retain FA or LB mounting (SC-series compatible). For strokes of 300 mm or longer, verify side-load limits to prevent rod binding. Note that this non-magnetic SKU cannot support switches, and the external stop sets end position only—it is not a lock, so add a pilot-operated check valve or external rod lock for load holding.
Replacement checklist
- ✓ Same bore / stroke → SAUJ63X100-30H
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ63X100-30H FAQ
Yes, the SUJ63X100-30H is discontinued. The direct replacement is the SAUJ63X100-30H, which matches the 63 mm bore, 100 mm stroke, 30 mm adjust window, 3/8" port, and FA/LB mounting. The SAUJ uses current CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B.
The external stop screw provides a 30 mm adjust window, allowing you to trim the extend stroke from the 100 mm maximum down to 70 mm on-site.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ63X100-30H
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ63X100-30H replacement — usually within 7-8 hours.