This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAUJ63X200-40, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ63X200-40
The AirTAC Airtac SUJ Adjustable Cylinder SUJ63X200-40 is a double-acting profile-type standard cylinder with a Ø63mm bore and 200mm stroke, 3/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAUJ63X200-40, which matches its bore, stroke, force and mounting.
- BoreØ63 mm
- Stroke200 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → SAUJ63X200-40
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ63X200-40
The AirTAC SUJ63X200-40 is a discontinued double-acting double-rod profile cylinder with a 63 mm bore and 200 mm maximum stroke. An external stop screw lets you trim the extend stroke by up to 40 mm on-site, yielding a usable extend range of 160-200 mm. This compact aluminum barrel body is shorter than an ISO 15552 unit of the same bore. The 3/8" port and M16x1.5 rod thread handle flows for speeds of 30-800 mm/s.
Because this model is end-of-life, the direct replacement is the SAUJ63X200-40, which preserves the bore, stroke, force, 3/8" port, and FA/LB mounting. Two key upgrade facts apply: the SAUJ uses current CMSG/DMSG/EMSG sensors whereas this legacy SUJ used CS1-B/DS1-B switches, and the SAU line adds an SAUF built-in-valve variant the SU series lacked. Note this SKU has no magnet and cannot take a sensor; the stop screw sets end position but is not a load lock, so use an external rod lock for held loads.
Airtac SUJ Adjustable Cylinder SUJ63X200-40 Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ63X200-40 |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ63X200-40 |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ63X200-40 carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
The SAUJ63X200-40 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ63X200-40
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ63X200-40 Is Used
Variable Pitch Forming
Bends or stamps parts to different lengths on the same fixture by dialing the extend stroke down 40 mm on-site without swapping cylinders.
Adjustable Transfer Diverter
Tunes the pusher extension precisely to clear varying package widths on a packaging line, preventing over-travel damage.
Multi-Height Pallet Stop
Sets custom end positions for different pallet stack heights, allowing quick manual adjustment of the stop screw for each run.
Replacing the Airtac SUJ Adjustable Cylinder SUJ63X200-40 with the SAUJ63X200-40
To replace the discontinued SUJ63X200-40, order the direct replacement SAUJ63X200-40, which matches the 63 mm bore, 200 mm nominal stroke, 3/8" port, and FA/LB mounting. Choose the 40 mm adjust window if your mechanism requires field tuning the extend stroke down to 160 mm; if fixed positioning is acceptable, a standard SAU cylinder with an external stop may suffice. Because this specific SKU lacks a magnet, it cannot accept sensors; if you need position detection, select the -S version of the SAUJ and migrate to CMSG/DMSG/EMSG switches from the legacy CS1-B/DS1-B. For strokes of 300 mm or longer, verify side-load limits to prevent guide wear.
Replacement checklist
- ✓ Same bore / stroke → SAUJ63X200-40
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ63X200-40 FAQ
Yes, the SUJ63X200-40 is discontinued. The direct replacement is the SAUJ63X200-40, which matches the 63 mm bore, 200 mm stroke, 3/8" port, and FA/LB mounting. The SAUJ upgrades to current CMSG/DMSG/EMSG sensors from the legacy CS1-B/DS1-B.
The external stop screw provides a 40 mm adjust window, shortening the 200 mm extend stroke down to 160 mm on-site. The stop sets end position and is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ63X200-40
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ63X200-40 replacement — usually within 7-8 hours.