This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAUJ63X225-10S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ63X225-10S
The AirTAC Airtac SUJ Adjustable Cylinder SUJ63X225-10S is a double-acting profile-type standard cylinder with a Ø63mm bore and 225mm stroke, 3/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAUJ63X225-10S, which matches its bore, stroke, force and mounting.
- BoreØ63 mm
- Stroke225 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → SAUJ63X225-10S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ63X225-10S
The AirTAC SUJ63X225-10S is a double-acting double-rod profile cylinder with an external stop screw that lets you trim the extend stroke by up to 10 mm on-site, yielding a usable 215-225 mm extension out of the 225 mm nominal maximum. The 3/8" port and M16x1.5 rod end are fixed by the bore. This discontinued unit used a CS1-B/DS1-B piston magnet for position sensing.
The direct replacement is the SAUJ63X225-10S, matching the exact bore, stroke, force, port, and FA/LB mounting. Upgrading to the SAUJ moves you to current CMSG/DMSG/EMSG sensors and opens access to the SAUF built-in-valve variant. Note the stop screw sets end position only; it is not a load lock, so use an external rod lock for held loads.
Airtac SUJ Adjustable Cylinder SUJ63X225-10S Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ63X225-10S |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ63X225-10S |
| Bore size | Ø63 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ63X225-10S carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
The SAUJ63X225-10S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ63X225-10S
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ63X225-10S Is Used
Probe Contact Tuning
Trimming the final 10 mm of extend stroke on-site to set precise contact pressure against a test probe without machining hard stops.
Flight Transfer Pitching
Adjusting the extend endpoint by a few millimetres to synchronise a pusher flight with varying product widths on a packaging line.
Pallet Stop Positioning
Micro-adjusting the extended stop finger position to accommodate slight pallet length variances in a handling cell.
Replacing the Airtac SUJ Adjustable Cylinder SUJ63X225-10S with the SAUJ63X225-10S
To replace this discontinued SUJ63X225-10S, specify the SAUJ63X225-10S direct: it preserves the 63 mm bore, 225 mm nominal stroke, 318 kgf max force, 3/8" port, and FA/LB mounting. The -10 mm adjust window is ideal for fine-tuning the extend endpoint without shimming; if you need a larger trim range, select a different adjust suffix. Retain your FA or LB mounts, but note the sensor change: the -S magnet on this legacy model used CS1-B/DS1-B switches, whereas the SAUJ uses CMSG/DMSG/EMSG. For this 225 mm stroke, verify side-load alignment to prevent rod binding.
Replacement checklist
- ✓ Same bore / stroke → SAUJ63X225-10S
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ63X225-10S FAQ
Yes, the AirTAC SUJ63X225-10S is discontinued. The direct replacement is the SAUJ63X225-10S, which matches the 63 mm bore, 225 mm stroke, 3/8" port, and FA/LB mounting. The SAUJ uses current CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B switches.
This double-acting double-rod cylinder has a 10 mm adjust window (usable extend stroke 215-225 mm). The external stop screw sets the end position but is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ63X225-10S
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ63X225-10S replacement — usually within 7-8 hours.