This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is SAUJ63X400-75S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the SAUJ63X400-75S in place of this model. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ63X400-75S
The AirTAC Airtac SUJ Adjustable Cylinder SUJ63X400-75S is a double-acting profile-type standard cylinder with a Ø63mm bore and 400mm stroke, 3/8" air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the SAUJ63X400-75S, which matches its bore, stroke, force and mounting.
- BoreØ63 mm
- Stroke400 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → SAUJ63X400-75S
About the Airtac SUJ Adjustable Cylinder SUJ63X400-75S
The AirTAC SUJ63X400-75S is a double-acting single-rod profile cylinder that lets you trim the extend stroke by up to 75 mm on-site, yielding a usable 325-400 mm range from its 400 mm nominal maximum. It delivers 1559 N push and 1402 N pull at 0.5 MPa, peaking at 2805 N push at 0.9 MPa (318 kgf theoretical max). The 63 mm bore carries a 3/8" port and M16x1.5 rod thread.
This discontinued model drops in directly to the SAUJ63X400-75S, retaining the exact bore, stroke, force, port, and FA/LB mounting. The stop screw sets the end position but is not a load lock; drift occurs on air loss, so use an external rod lock for held loads. At 0.5 MPa, the safe working load is roughly 935 N (about 60% of push force), translating to a 79 kg vertical lift with a 2:1 margin. The SAUJ upgrade moves from legacy CS1-B/DS1-B sensors to current CMSG/DMSG/EMSG switches.
Airtac SUJ Adjustable Cylinder SUJ63X400-75S Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ63X400-75S |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ63X400-75S |
| Bore size | Ø63 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ63X400-75S carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
The SAUJ63X400-75S produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ63X400-75S
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ63X400-75S Is Used
Variable Pitch Indexing
Allows a single actuator to feed different material lengths by tuning the 75 mm extend window on-site for each job changeover.
Adjustable Transfer Stops
Sets precise divert positions on a packaging line, trimming the extend stroke up to 75 mm to handle varying box dimensions without swapping cylinders.
Variable Height Ejection
Tunes the ejection reach on a palletizer to push loads onto different conveyor heights, using the 325-400 mm usable stroke range.
Replacing the Airtac SUJ Adjustable Cylinder SUJ63X400-75S with the SAUJ63X400-75S
To replace the discontinued SUJ63X400-75S, order the exact drop-in SAUJ63X400-75S, which preserves the 3/8" port, M16x1.5 rod, and FA/LB mounting. When sizing both ways, the neighbouring 50 mm bore yields 982 N push at 0.5 MPa, while the 80 mm bore provides 2513 N push. Select the 75 mm adjust window if you need to trim the extend stroke on-site; the stop screw sets end position but is not a lock. For the -S magnet, swap legacy CS1-B/DS1-B switches to SAUJ-compatible CMSG/DMSG/EMSG sensors. Because the 400 mm stroke exceeds 300 mm, add external guides to prevent rod bending and manage side loads.
Replacement checklist
- ✓ Same bore / stroke → SAUJ63X400-75S
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ63X400-75S FAQ
Yes, the SUJ63X400-75S is discontinued. The exact drop-in replacement is the SAUJ63X400-75S, which matches the 63 mm bore, 400 mm stroke, 75 mm adjust window, 3/8" port, and FA/LB mounting. You only need to upgrade the switches from legacy CS1-B/DS1-B to current CMSG/DMSG/EMSG sensors.
The double-acting single-rod cylinder pushes 1559 N at 0.5 MPa, 2182 N at 0.7 MPa, and 2805 N at 0.9 MPa, with a 1402 N pull at 0.5 MPa and 318 kgf theoretical max. The external stop screw window trims the extend stroke by up to 75 mm on-site, giving a usable 325-400 mm range. The stop sets end position only; it is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ63X400-75S
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ63X400-75S replacement — usually within 7-8 hours.