Airtac X-APC Threaded Straight Connector X-APC603
AirTAC X-APC603 Threaded Straight Fitting Specifications
- Model: X-APC603
- Type: Metric thread straight-through connector
- Material: Cold forged brass (CuZn39Pb3) with electroless nickel plating
- Thread specification: M5×0.8 male thread both ends
- Working pressure: 0.05-1.5 MPa (7-217 psi)
- Burst pressure: ≥6.0 MPa
- Temperature range: -20℃ to 80℃ (NBR seals)/120℃ (FKM seals optional)
- Flow coefficient (Cv): 0.15
- Weight: 8.2±0.3g
- Dimensions: 18mm(L) × 8.5mm(W) × 8.5mm(H)
- Surface roughness: Ra ≤1.6μm
- Vibration resistance: 10-55Hz, 1.5mm amplitude
Precision-engineered pneumatic connector featuring dual male threads for inline tube connections in compact spaces. The hexagonal body design allows 360° tool access with anti-rotation flats. Nickel plating provides corrosion resistance exceeding 96hrs salt spray test (ASTM B117). Compatible with pneumatic fluids including lubricated air and inert gases.
- Pneumatic cylinder port extensions
- Modular valve manifold interconnections
- Sensor mounting brackets in automation cells
- Air tool pressure gauge adapters
- Compressed air distribution blocks
Installation protocol:
Apply thread sealant only on male threads (PTFE tape or LOCTITE 577 recommended).
Tighten to 1.2-1.5N·m torque using 8mm wrench. Perform pressure test at 1.8MPa
after installation. Avoid overtightening - maximum 2 full turns past finger-tight.
- High-temperature environments (X-APC603-FKM)
- Chemical exposure applications (X-APC603-FFKM)
- Ultra-clean medical gas systems (X-APC603-EPDM)
| Property | Property Value |
|---|---|
| sku | X-APC603 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.