Airtac X-APL L-Thread Elbow Fitting X-APL10M10
AirTAC X-APL10M10 L-Type Threaded Tee Fitting Specifications
- Model: X-APL10M10
- Type: L-shaped metric threaded tee connector
- Thread standard: M10×1.0 male threads (ISO 6149 compliant)
- Material: Nickel-plated brass (CuZn39Pb3)
- Pressure rating: 0.05-1.5 MPa (7-217 psi)
- Temperature range: -5℃ to 80℃ (23℉ to 176℉)
- Seal type: Integrated O-ring (NBR rubber)
- Surface treatment: Electroless nickel plating (8-12μm thickness)
- Weight: ~45g
- Dimensions: 50mm(L) × 16mm(W) × 16mm(H)
- Port configuration: 1 input (vertical) + 2 outputs (90° L-shape)
- Leakage rate: <0.1 mL/min @ 0.5MPa
- Vibration resistance: 10-55Hz @ 1.5mm amplitude
Precision-machined flow distribution fitting featuring corrosion-resistant construction and zero-clearance thread engagement. The 60° cone seating design ensures bubble-tight sealing under dynamic pressure conditions. Includes pre-installed wear-resistant sealing washer for immediate installation.
- Pneumatic circuit branching in automation equipment
- Compact air distribution in robotic end effectors
- Modular assembly of compressed air networks
- Hydraulic test bench manifold connections
- CNC machine tool coolant line junctions
Installation protocol:
Apply 2-3 wraps of PTFE tape clockwise on male threads. Hand-tighten until
washer compression begins, then apply 1/4 additional turn with wrench.
Maximum torque: 14.7N·m. Avoid cross-threading through proper port alignment.
Compatibility note:
Not suitable for oxygen systems or chemical media incompatible with NBR.
Always perform pressure test at 1.25× working pressure after installation.
| Property | Property Value |
|---|---|
| sku | X-APL10M10 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.