Airtac Adjustable Cylinder SAIJ32 SAIJ32AX190-75
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX190-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 190mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke190 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX190-75
The AirTAC SAIJ32X190-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel anywhere within a 115 to 190 mm window. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
This adjustable model lets you dial in the exact retract end-position during commissioning or product changeover without swapping the cylinder or adding external stops. The rear screw acts purely as a travel stop to set deceleration alongside the standard air cushions; it does not hold the load without live air. For true load-holding without pressure, consider the SAIL or BSAI series.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX190-75 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX190-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX190-75
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX190-75 Is Used
Product Changeover
Rapidly reconfigure the retract distance from 115 to 190 mm on packaging lines handling varying carton sizes without changing the cylinder.
Variable Positioning
Set custom retract lengths for testing fixtures, allowing flexible stroke endpoints while maintaining the standard ISO 15552 footprint.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX190-75 the Right Cylinder?
If your setup needs greater thrust, stepping up to the 40 mm bore yields 628 N at 0.5 MPa. The 75 mm adjustment range is ideal for machinery that processes multiple product sizes, allowing you to reposition the end-stop rapidly rather than maintaining an inventory of fixed-stroke SAI cylinders. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 190 mm nominal stroke, PT port threads, and the required mounting hardware. Because the 12 mm rod and M10x1.25 thread provide limited side-load capacity, always use an external guide if the load is heavy or asymmetric. Note that this unit lacks a magnet, so it cannot host CMSE or DMSE sensors without a different configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX190-75 FAQ
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw allows you to shorten the effective stroke by up to 75 mm from the 190 mm nominal length, providing a usable travel window of 115 to 190 mm. The adjuster acts as a mechanical stop and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX190-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.