Airtac Adjustable Cylinder SAIJ32 SAIJ32AX20-10S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX20-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 20mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke20 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX20-10S
The AirTAC SAIJ32X20-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 10 to 20 mm for exact end-position tuning. The rod is constructed from SUS420J2 stainless steel, and the unit uses PT tapered ports.
This adjustable-stroke design allows you to fine-tune the retract position at commissioning without swapping the cylinder or adding external stops. The rear adjuster functions strictly as a travel stop and does not hold the load without live air pressure. It supports a mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX20-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX20-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX20-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX20-10S Is Used
Machine Changeover
Dial in the exact end-stop during product size changes on a packaging line without physically replacing the cylinder.
Clamping Positioning
Fine-tune the clamping travel window from 10 to 20 mm during commissioning to prevent over-travel on delicate workpieces.
Sensor Setup
Leverage the integrated magnet for CMSE or DMSE sensors while adjusting the rear stopper to perfect the signal trigger point.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX20-10S the Right Cylinder?
If your setup demands higher force, the 40 mm bore provides 628 N at the same pressure. The adjustable stroke is ideal for machine changeovers where the end-stop varies, unlike a fixed-stroke SAI cylinder. For load-holding without live air, consider the SAIL or BSAI series. To match this ISO 15552 replacement, specify the 32 mm bore, 20 mm stroke, 10 mm adjustment, PT ports, and the -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX20-10S FAQ
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster acts as a mechanical stop that allows you to trim the effective travel back by up to 10 mm, creating a usable stroke window of 10 to 20 mm. It functions as a travel stop, not a lock, and requires live air to hold the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX20-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.