Airtac Adjustable Cylinder SAIJ32 SAIJ32AX200-75
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX200-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke200 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX200-75
The AirTAC SAIJ32X200-75 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 125-200 mm usable travel window by allowing you to dial back the 200 mm nominal stroke by up to 75 mm.
This variant features a SUS420J2 stainless steel rod for enhanced corrosion resistance and uses PT tapered port threads (G1/8). The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. The rear adjuster acts purely as a mechanical stop to fine-tune travel, so live air pressure is still required to hold the load.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX200-75 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX200-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX200-75
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX200-75 Is Used
Machine Changeover
Dial in the 125-200 mm travel window during product size transitions without swapping out the physical cylinder assembly.
End-Position Tuning
Fine-tune the retract stroke at commissioning to perfect pressing or clamping depth without adding bulky external mechanical stops.
Variable Diverter Stops
Adjust the retract distance on the fly to handle different package lengths moving down a conveyor line.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX200-75 the Right Cylinder?
The 75 mm adjustment range is ideal for machines that process varying part sizes, letting you reposition the end-stop during changeover rather than physically swapping the cylinder or adding external stops.
For a direct ISO 15552 replacement, match the 32 mm bore, 200 mm stroke, 75 mm adjustment, PT ports, and the Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting interface. Because the total stroke is 200 mm, ensure external guidance is used to prevent excessive side-loading on the 12 mm rod. If you need fail-safe load holding without continuous air pressure, select the SAIL or BSAI series instead, as the SAIJ adjuster is not a lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX200-75 FAQ
The rear adjuster acts as an external mechanical stop, allowing you to shorten the 200 mm nominal stroke by up to 75 mm. This creates a 125-200 mm usable travel window that can be fine-tuned during commissioning.
It can reach a maximum of 801 N at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX200-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.