Airtac Adjustable Cylinder SAIJ32 SAIJ32AX210-100
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX210-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 210mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke210 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX210-100
The AirTAC SAIJ32X210-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 110-210mm usable travel window from its 210mm nominal length. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting.
This SKU is configured with a SUS420J2 stainless steel rod (option A) for enhanced corrosion resistance over standard carbon steel. It uses PT tapered port threads and lacks a piston magnet. The rear adjuster acts strictly as a travel stop for end-position tuning, not a load-holding lock.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX210-100 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX210-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX210-100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX210-100 Is Used
Machine Setup Tuning
Dial in the exact 110-210mm end-stop during commissioning without swapping hardware.
Product Size Changeover
Quickly adapt the travel end for varying product lengths on a packaging line.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX210-100 the Right Cylinder?
The 100mm adjustment range is ideal for prototyping or product changeovers where the exact end-stop varies by up to 100mm, eliminating the need to swap cylinders or bolt on external stops.
For stroke lengths of 210mm, the 12mm rod diameter handles moderate side loads, but an external guide rail is recommended for heavy off-center loads. This cylinder is dimensionally interchangeable per ISO 15552 mounting interfaces. To hold a load without live air pressure, select the SAIL or BSAI series instead, as this model's adjuster and air cushions do not function as a brake.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX210-100 FAQ
The rear adjuster screw trims the effective travel back by up to 100mm, creating a 110-210mm usable stroke window. It functions as a mechanical stop for end-position tuning and does not hold the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX210-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.