Airtac Adjustable Cylinder SAIJ32 SAIJ32AX260-75
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX260-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 260mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke260 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX260-75
The AirTAC SAIJ32X260-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. By integrating a rear stopper screw, this model provides a usable travel window of 185 to 260 mm, allowing you to dial back the nominal 260 mm stroke by up to 75 mm during commissioning.
This adjustable-stroke design eliminates the need to swap cylinders or bolt on external stops when fine-tuning end positions. The extruded aluminum barrel includes sensor grooves on both sides, though this specific configuration omits the magnet, meaning CMSE or DMSE electronic sensors cannot be used for position detection. The rod is constructed from SUS420J2 stainless steel (code A) for enhanced corrosion resistance, and the cylinder supports PT tapered port threads.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX260-75 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX260-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX260-75
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX260-75 Is Used
Product Changeover
Quickly adjust the retract end-position by up to 75mm when switching between product sizes on a packaging line, without replacing the cylinder.
Machine Setup
Fine-tune the 185-260mm travel window during initial commissioning to achieve precise end-of-stroke positioning without external stops.
Variable End Stops
Dial in the exact stopping point for diverter arms or gating mechanisms on a conveyor, adapting to varying package dimensions on the fly.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX260-75 the Right Cylinder?
The rear adjuster acts solely as a travel stop to set the retract position; it does not hold the load without live air pressure. For load-holding requirements without continuous air supply, consider an AirTAC SAIL or BSAI cylinder, or use an external pilot-operated check valve.
To match this ISO 15552 cylinder for replacement, verify the 32mm bore, 260mm stroke, 75mm adjustment range, PT G1/8 port, and the absence of a magnet. The SAIJ mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR brackets. Since the 260mm stroke exceeds 300mm only marginally but still represents extended travel, ensure adequate external guiding to prevent excessive side-loading on the rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX260-75 FAQ
At 0.7 MPa, the push force increases to 563N.
The rear adjuster screw allows you to shorten the effective stroke from the nominal 260mm down to a minimum of 185mm, giving a 75mm adjustable window. The adjuster acts as a mechanical stop and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX260-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.