Airtac Adjustable Cylinder SAIJ32 SAIJ32AX280-10
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX280-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 280mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke280 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX280-10
The AirTAC SAIJ32X280-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel within a 270-280 mm window.
Because the adjuster acts as a retract-end stop rather than a locking mechanism, it decelerates the piston without holding the load absent live air pressure. The extruded aluminum barrel includes sensor grooves on both sides for straightforward positioning of CMSE reed or DMSE electronic solid-state switches.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX280-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX280-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX280-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX280-10 Is Used
Machine Changeover
Dial in the 270-280 mm travel window during product size transitions to set precise retract positions without adding external physical stops.
End-Position Tuning
Compensate for mechanical tolerance stack-up at commissioning by trimming the stroke up to 10 mm via the rear adjusting screw.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX280-10 the Right Cylinder?
Choose this 32 mm bore when your application requires the exact end-position tuning that a fixed-stroke SAI cylinder cannot provide, allowing quick product changeovers without swapping hardware.
At 280 mm of travel, this unit approaches the threshold where rod side-loading becomes a concern; an external guide is recommended to prevent premature seal wear. For any load-holding requirements without continuous air pressure, the rear stop is insufficient, and a SAIL pneumatic lock or BSAI clamp-lock cylinder should be specified instead. This SAIJ configuration supports the Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounting set.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX280-10 FAQ
At the maximum 1.0 MPa pressure, it can output up to 82 kgf.
The rear adjuster acts as an external stopper that trims the effective stroke back by up to 10 mm, giving you a usable travel window of 270-280 mm. It sets the end position but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX280-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.