Airtac Adjustable Cylinder SAIJ32 SAIJ32AX30-30
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX30-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 30mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke30 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX30-30
The AirTAC SAIJ32X30-30 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 30mm travel by up to 30mm. This creates a highly versatile 0-30mm usable stroke window, giving you exact control over the end position during commissioning without needing to swap out the cylinder or bolt on external stops.
This model features a SUS420J2 stainless steel rod for enhanced durability against side loads and uses PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, and while no magnet is specified here, adding one enables compatibility with AirTAC CMSE reed and DMSE electronic sensors. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX30-30 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX30-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX30-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX30-30 Is Used
Position Calibration
Dial in the exact 0-30mm end position during machine commissioning to perfect sensor triggering and part placement.
Machine Changeover
Quickly adjust the travel end-stop on the line when switching between product sizes without replacing the cylinder.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX30-30 the Right Cylinder?
Choose this 32mm bore when your application requires precise end-stop tuning within a very short travel distance. The rear adjuster screw acts purely as a travel stop and does not hold the load without live air; for true fail-safe load holding, consider the SAIL or BSAI series. Because the stroke is under 300mm, side-load risks are minimal, but an external guide is still recommended for heavy lateral loads. To match this ISO 15552 replacement exactly, verify the 30mm stroke, 30mm adjustment, PT port, and mounting interface.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX30-30 FAQ
The rear adjuster screw lets you shorten the 30mm nominal stroke by up to 30mm, providing a usable travel window of 0-30mm. It acts as a mechanical stop to fine-tune the end position without changing the cylinder itself.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX30-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.