Airtac Adjustable Cylinder SAIJ32 SAIJ32AX375-30
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX375-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 375mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke375 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX375-30
The AirTAC SAIJ32X375-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 375mm nominal stroke that can be fine-tuned backward by up to 30mm, creating a usable travel window of 345-375mm. In this configuration, the piston rod uses SUS420J2 stainless steel (code A) for enhanced corrosion resistance, and the fluid ports are PT tapered threads.
The defining benefit is on-the-fly end-position tuning during commissioning or product changeover, letting you dial in the exact retract stop without swapping the cylinder or bolting on external hardware. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX375-30 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX375-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX375-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX375-30 Is Used
Variable End-Stop Setup
Dial in the exact retract distance between 345mm and 375mm during machine commissioning to accommodate varying material thicknesses without changing hardware.
Product Changeover
Quickly adjust the stroke stop on the fly when switching a packaging line to a different carton size, saving downtime versus physically replacing cylinders.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX375-30 the Right Cylinder?
Choose this 32mm bore adjustable-stroke cylinder when your application requires precise retract positioning that might vary slightly between product runs, making a fixed-stroke SAI cylinder less practical.
Because the 375mm stroke is relatively long for a 32mm rod, an external guide is recommended to prevent excessive side loading and premature seal wear. The rear adjuster acts strictly as a travel stop and works with the variable air cushions to decelerate the load; it does not hold the load without live air. For true load-holding without continuous pressure, consider the SAIL or BSAI series. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX375-30 FAQ
At 0.7MPa, the push force increases to 563N.
The rear adjusting screw acts as a mechanical stopper that lets you shorten the effective stroke by up to 30mm. This creates a usable travel window of 345-375mm from the 375mm nominal stroke, allowing precise end-position tuning without adding external stops.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX375-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.