Airtac Adjustable Cylinder SAIJ32 SAIJ32AX45-30
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX45-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 45mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke45 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX45-30
The AirTAC SAIJ32X45-30 is a double-acting, single-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 402N push force at 0.5 MPa and utilizes a PT G1/8 port. The built-in rear stopper allows you to trim the nominal 45mm travel back by up to 30mm, creating a highly versatile 15-45mm usable stroke window for exact end-position tuning during machine commissioning.
This adjustable-stroke configuration eliminates the need to swap cylinders or bolt on external stops when refining the retract position. It features a SUS420J2 stainless steel rod for enhanced durability against side loads, and the extruded aluminum barrel includes sensor grooves on both sides. Mounting options include the reduced SAIJ set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX45-30 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX45-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX45-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX45-30 Is Used
End-Position Tuning
Dial in the exact retract distance within the 15-45mm window during machine setup to perfect pick-and-place timing without changing hardware.
Product Changeovers
Quickly adapt the cylinder's effective stroke on packaging lines when handling different package sizes, using the rear stopper to set new limits.
Assembly Clamping
Apply up to 402N of clamping force at 0.5 MPa while fine-tuning the approach distance to protect delicate components from over-travel.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX45-30 the Right Cylinder?
Choose this 32mm bore when you need precise 15-45mm travel tuning and a compact footprint delivering 402N push force at 0.5 MPa. If your application requires greater thrust, stepping up to the 40mm bore yields 628N push force at 0.5 MPa, but increases the physical envelope. The SAIJ32X45-30 is selected specifically over a fixed-stroke SAI when product changeovers demand variable end-stops without mechanical rework.
For ISO 15552 replacement matching, verify the 32mm bore, 45mm stroke, 30mm adjustment, PT G1/8 port, and the desired mounting bracket. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for fail-safe load holding without pressure, consider an AirTAC SAIL or BSAI series cylinder instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX45-30 FAQ
At a 0.5 MPa operating pressure, this 32mm bore cylinder provides a push force of 402N and a pull force of 345N. It can deliver up to 724N push force at 0.9 MPa.
The rear adjusting screw acts as a mechanical stopper that lets you shorten the effective travel from the 45mm nominal stroke down to as little as 15mm. This provides a 15-45mm usable window for fine-tuning the retract end position at commissioning.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX45-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.