Airtac Adjustable Cylinder SAIJ32 SAIJ32AX45-30S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX45-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 45mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke45 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX45-30S
The AirTAC SAIJ32X45-30-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. By turning the rear stopper screw, you can trim the nominal 45mm stroke back by up to 30mm, creating a precise 15-45mm usable travel window for commissioning without swapping hardware.
This compact 32mm bore unit includes a magnet for CMSE reed and DMSE electronic sensors, which seat directly into the dual-side extruded barrel grooves. The rod is manufactured from SUS420J2 stainless steel (option A) for enhanced durability, and the body uses PT tapered port threading. It supports speeds of 30-800 mm/s and uses the standard SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR brackets.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX45-30S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX45-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX45-30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX45-30S Is Used
Machine Changeover
Dial in the 15-45mm travel window during product size transitions without replacing the cylinder or adding external mechanical stops.
End-Position Tuning
Fine-tune the retract stroke endpoint at commissioning to perfectly strike or press a component within a compact 32mm bore footprint.
Sensor Integration
Utilize the integrated magnet with DMSE electronic or CMSE reed switches in the standard barrel grooves for precise position feedback.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX45-30S the Right Cylinder?
Choose this 32mm bore adjustable cylinder when your application requires exact end-position tuning rather than a fixed 45mm stroke. If your process needs less force, stepping down is not an option from this size, but if you require higher thrust, a 40mm bore provides 628N at 0.5 MPa. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure; for true load-holding, select an SAIL or BSAI cylinder. This SAIJ32X45-30-S is dimensionally interchangeable per ISO 15552 and is configured with a PT port, SUS420J2 rod, and a -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX45-30S FAQ
The rear adjuster screw allows you to shorten the nominal 45mm stroke by up to 30mm. This creates a 15-45mm usable travel window, enabling fine-tuning of the end position without changing the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX45-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.