Airtac Adjustable Cylinder SAIJ32 SAIJ32AX450-10
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX450-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 450mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke450 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX450-10
The AirTAC SAIJ32X450-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 440-450mm usable travel window. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
Equipped with PT tapered port threading and a G1/8 air supply connection, this unit achieves standard speeds of 30-800mm/s. The rear stopper screw allows you to fine-tune the retract end position by up to 10mm during commissioning without adding external stops. This adjuster acts purely as a travel limiter and does not hold the load without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX450-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX450-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX450-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX450-10 Is Used
End-Position Tuning
Dial in the exact retract distance within the 440-450mm window during machine commissioning to perfect product handling without external stopper blocks.
Product Changeover
Quickly adjust the travel end-stop on packaging lines when switching between slightly different package sizes, minimizing downtime.
Sorting Diverter
Precisely set the rejection stroke on a conveyor belt system to push varying product profiles accurately into sorting bins.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX450-10 the Right Cylinder?
Choose this 32mm bore when you need lighter force (402N at 0.5MPa) and step up to the 40mm bore if your application requires 628N. The 10mm adjustment range is ideal for dialing in exact end positions during machine setup or product changeover, avoiding the need to physically swap a fixed-stroke SAI cylinder. If your process demands true load-holding without continuous air pressure, consider the SAIL or BSAI locking cylinder series instead.
With a 450mm stroke, the 12mm rod and M10x1.25 thread provide a robust interface, but long unsupported strokes still require an external guide to prevent side-loading damage. This SAIJ model supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets. It is dimensionally interchangeable per ISO 15552 mounting interfaces.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX450-10 FAQ
The maximum thrust is 82kgf at 1.0MPa.
The rear adjuster screw allows you to shorten the nominal 450mm stroke by up to 10mm, creating a 440-450mm travel window. This stopper only limits the travel end and does not lock or hold the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX450-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.