Airtac Adjustable Cylinder SAIJ32 SAIJ32AX50-10
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX50-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 50mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke50 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX50-10
The AirTAC SAIJ32X50-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the travel window from 40 to 50 mm without adding external stops.
The rear adjustment screw acts purely as a travel stop to set the retract end position, meaning it cannot hold a load without live air pressure. It shares the standard extruded aluminum barrel with dual sensor grooves, but utilizes a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) omitting FB and CA options.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX50-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX50-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX50-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX50-10 Is Used
Machine Setup Tuning
Dial in the exact 40 to 50 mm retract position during initial commissioning to perfect pick-and-place trajectories without machining custom spacers.
Product Size Changeover
Quickly adapt the cylinder's effective stroke on packaging lines when running different product lengths, minimizing downtime between batches.
Variable End Stops
Use the rear stopper screw to set precise retract limits for delicate pressing tasks, preventing overtravel while maintaining a 30-800 mm/s speed range.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX50-10 the Right Cylinder?
If your process demands less force, stepping down is not an option in this series, but if you need higher force, stepping up to the 40 mm bore yields 628 N at 0.5 MPa. The adjustable stroke is ideal for product changeovers where a fixed-stroke SAI cylinder would require physical shimming. Because the plain SAIJ lacks a lock, use a SAIL or BSAI cylinder if you need fail-safe load holding without live air. For a true ISO 15552 replacement match, specify bore 32, stroke 50, 10 mm adjustment, PT ports, your desired mounting, and no magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX50-10 FAQ
The rear adjuster screw lets you shorten the nominal 50 mm stroke by up to 10 mm, providing a usable travel window of 40 to 50 mm. The adjuster functions only as a mechanical stop to set the end position and does not lock the load without continuous air pressure.
It can reach a maximum of 82 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX50-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.