Airtac Adjustable Cylinder SAIJ32 SAIJ32AX500-75
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX500-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 500mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke500 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX500-75
The AirTAC SAIJ32X500-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 425-500mm usable travel window, letting you dial back the 500mm nominal stroke by up to 75mm during commissioning.
This variant uses a SUS420J2 stainless steel rod for enhanced corrosion resistance and features PT tapered ports. The extruded aluminum barrel includes sensor grooves on both sides, ready for AirTAC CMSE reed or DMSE electronic solid-state switches if a magnet is added later. It uses the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1 and TCM2.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX500-75 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX500-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX500-75
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX500-75 Is Used
Machine Changeover
Quickly fine-tune the 425-500mm travel window during product size changes without replacing the cylinder or adding external mechanical stops.
Variable End-Stop Setup
Ideal for automated test fixtures where the exact retract distance needs precise dialing-in at commissioning via the rear stopper screw.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX500-75 the Right Cylinder?
If you need greater thrust, stepping up to the 40mm bore yields 628N. The 75mm adjustment window is ideal for product changeovers, allowing you to fine-tune the retract end-position without swapping the cylinder or bolting on external stops.
Because the 500mm stroke is long relative to the 12mm rod diameter, an external guide is recommended to prevent excessive side-loading. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for fail-safe load holding, consider an external rod lock or the AirTAC SAIL or BSAI series. For a direct ISO 15552 replacement, match the 32mm bore, 500mm stroke, 75mm adjustment, PT ports, and the specified mounting style.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX500-75 FAQ
The maximum thrust is 82 kgf at 1.0 MPa.
The rear adjuster screw lets you shorten the effective travel from the 500mm nominal stroke down to 425mm. It acts as a mechanical stop to fine-tune the end position and works alongside the standard air cushions, but it does not lock or hold the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX500-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.