Airtac Adjustable Cylinder SAIJ32 SAIJ32AX55-30S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX55-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 55mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke55 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX55-30S
The AirTAC SAIJ32X55-30-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 25 to 55 mm, letting you dial in the exact retract position without adding external stops.
This variant includes a magnet for CMSE reed and DMSE electronic sensors, and it features an SUS420J2 stainless steel rod (option A) for improved corrosion resistance. The extruded aluminum barrel keeps the footprint dimensionally interchangeable with ISO 15552 cylinders, and the adjustable stopper acts purely as a travel end, not a load-holding lock.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX55-30S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX55-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX55-30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX55-30S Is Used
Machine Setup Changeover
Dial in the exact 25 to 55 mm retract position during product changeover without swapping the cylinder or bolting on external stops.
Variable End Stops
Fine-tune the retract end position on packaging or assembly machines to accommodate minor variations in component sizing.
Sensor-Ready Positioning
Leverage the integrated magnet with DMSE electronic sensors to confirm the adjusted end position in automated control systems.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX55-30S the Right Cylinder?
If you need less force, stepping down is not an option in this series, but stepping up to a 40 mm bore yields 628 N. Select this adjustable-stroke model over a fixed SAI when you need frequent product changeover or commissioning fine-tune capabilities. The rear screw sets the travel end but does not hold the load without live air; for true load holding, consider SAIL or BSAI. Configuration: 32 mm bore, 55 mm stroke, 30 mm adjustment, PT port, SUS420J2 rod, magnet included.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX55-30S FAQ
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw lets you trim the 55 mm nominal stroke back by up to 30 mm, creating a usable travel window of 25 to 55 mm. The adjuster acts as a travel stop and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX55-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.