Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-30
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 60mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke60 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-30
The AirTAC SAIJ32X60-30 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the 60 mm nominal stroke by up to 30 mm. This yields a highly versatile 30-60 mm usable travel window, perfect for dialing in exact end positions at commissioning without swapping hardware. In the compact 32 mm bore class, it delivers 402 N of push force and 345 N of pull force at 0.5 MPa.
This variant features a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance compared to standard carbon steel. The rear screw acts purely as a travel stop for end-position tuning and relies on the integrated air cushion for deceleration; it is not a locking mechanism and will not hold a load without live air pressure. Pneumatic connections use a PT G1/8 tapered port.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-30 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-30 Is Used
End-Stop Calibration
Dial in the exact 30-60 mm travel distance during machine commissioning to perfect the seating position of delicate components.
Product Changeover
Quickly adjust the rear stopper screw to accommodate varying product sizes on a packaging line without changing the cylinder.
Assembly Positioning
Fine-tune the retraction point for a 402 N press operation, ensuring precise alignment before final actuation.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-30 the Right Cylinder?
Choose this 32 mm bore adjustable cylinder when your application requires fine end-position tuning within a 30-60 mm travel window, delivering 402 N push force at 0.5 MPa. If your setup demands greater thrust, stepping up to the 40 mm bore provides 628 N of push force. The SAIJ format is selected over a fixed-stroke SAI cylinder when you need variable end-stops for machine changeovers. For load-holding without continuous air pressure, this cylinder is insufficient since the adjuster is only a stop; you would need an external pilot-operated check valve or a SAIL lock cylinder.
To match this exact ISO 15552 interchangeable replacement, specify: 32 mm bore, 60 mm stroke, 30 mm adjustment range, PT G1/8 port, no magnet, and SUS420J2 rod. Mounting options are limited to the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2. The 12 mm rod and M10x1.25 thread handle moderate side loads well, though external guides are recommended for any off-center loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-30 FAQ
The rear adjuster screw allows you to shorten the effective stroke by up to 30 mm. This creates a usable travel window of 30-60 mm, letting you set the exact end position without adding external stops.
At 0.5 MPa operating pressure, the SAIJ32X60-30 provides 402 N of push force and 345 N of pull force. At its maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.