Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-30S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 60mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke60 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-30S
The AirTAC SAIJ32X60-30-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the 60 mm nominal stroke by up to 30 mm. This creates a highly flexible 30-60 mm usable travel window, perfect for applications requiring variable end stops without swapping hardware. It delivers 402 N of push force at 0.5 MPa and features a SUS420J2 stainless steel rod for enhanced corrosion resistance.
This model includes a magnet (-S) for use with AirTAC CMSE reed and DMSE electronic sensors, which seat cleanly into the sensor grooves on both sides of the extruded aluminum barrel. The rear adjuster acts purely as a mechanical stop to fine-tune the retraction point during commissioning; it does not lock the load without continuous air pressure. For position holding, an external SAIL or BSAI lock cylinder is required.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-30S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-30S Is Used
Machine Changeovers
Rapidly reconfigure retraction distances during product size changes without replacing the cylinder or repositioning hard stops.
End-Position Tuning
Fine-tune the exact end-of-stroke position during machine commissioning to perfect timing and avoid mechanical crashes.
Variable End Stops
Provide a customizable physical stop for delicate picking and placing operations where the travel distance varies per cycle.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-30S the Right Cylinder?
Choose this 32 mm bore when your application requires compact thrust up to 402 N at 0.5 MPa, but demands on-the-fly end-position tuning. If your setup requires significantly more force, stepping up to the 40 mm bore provides 628 N of push force. The adjustable stroke is selected over a fixed SAI cylinder when machine formats change frequently, allowing you to set exact retraction limits via the rear screw rather than adding external stops.
To match this exact configuration as an ISO 15552 replacement, specify: 32 mm bore, 60 mm stroke, 30 mm adjustment range, PT tapered port threads, SUS420J2 (A) rod material, and the -S magnet option. Mounting choices are limited to the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-30S FAQ
At a standard operating pressure of 0.5 MPa, this 32 mm bore cylinder generates 402 N of push force and 345 N of pull force. It can reach a maximum push force of 724 N at 0.9 MPa.
The rear adjuster screw allows you to shorten the 60 mm nominal stroke by up to 30 mm, providing a usable travel window of 30 to 60 mm. The screw acts as a mechanical stop to set the retraction point and does not function as a load lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.