Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-10
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 600mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke600 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-10
The AirTAC SAIJ32X600-10 is a double-acting, single-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It delivers 402N of push force at 0.5 MPa and provides a usable travel window of 590 to 600 mm, letting you dial in the exact end position without adding external stops. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
This model uses a SUS420J2 stainless steel rod (option A) for improved corrosion resistance and features PT tapered port threads with a G1/8 connection. The rear adjuster acts purely as a mechanical stop to set the travel limit; it does not lock or hold the load without continuous air pressure. For position-holding requirements, consider the SAIL or BSAI series instead.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-10 Is Used
Machine Commissioning
Fine-tune the 590-600 mm travel endpoint during initial machine setup to avoid machining custom spacers or swapping cylinders.
Product Changeover
Quickly adjust the rear stopper by up to 10 mm to accommodate slight variations in product size on a moving line.
End-Stop Calibration
Dial in the exact retracted position on automated fixtures where a fixed 600 mm stroke might overshoot the target.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-10 the Right Cylinder?
Choose this 32mm bore cylinder when you need 402N of push force at 0.5 MPa with precise end-position tuning over a 590-600 mm window. If your application requires less force, a smaller bore is needed, but if you need to step up to 628N, the 40mm bore is the neighbor. The adjustable stroke is perfect for machine setups requiring fine-tuning during commissioning rather than using a fixed-stroke SAI cylinder.
Because this cylinder has a 600 mm stroke, the 12mm rod requires external guiding to prevent excessive side-loading and premature seal wear. It supports a speed range of 30-800 mm/s and uses the standard SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR options. As a dimensionally interchangeable ISO 15552 cylinder, it drops into standard footprints seamlessly.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-10 FAQ
At 0.5 MPa operating pressure, this 32mm bore cylinder provides 402N of push force and 345N of pull force. It can reach a maximum push force of 724N at 0.9 MPa.
The rear adjuster screw allows you to shorten the effective stroke by up to 10 mm, creating a 590-600 mm usable travel window. It functions as a mechanical stop to fine-tune the end position and does not act as a lock to hold the load without air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.