Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-100
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 600mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke600 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-100
The AirTAC SAIJ32X600-100 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the 600 mm nominal travel to anywhere within a 500-600 mm usable window. Delivering 402 N of push force at 0.5 MPa, it utilizes a 12 mm SUS420J2 stainless steel rod (material code A) paired with PT tapered port threads (G1/8) for robust pneumatic connectivity.
This adjustable-stroke design eliminates the need to swap cylinders or bolt on external stops during product changeovers or commissioning fine-tuning. The extruded aluminum barrel features sensor grooves on both sides, and while this specific SKU lacks a magnet, the shared platform fully supports AirTAC CMSE reed and DMSE electronic sensors when magnetic detection is required.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-100 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-100 Is Used
Product Changeovers
Quickly fine-tune the 500-600 mm end-stop during packaging line format changes without replacing the entire cylinder.
Machine Setup
Dial in the exact retraction point at commissioning to perfect sensor alignment and seating positions.
Variable End Stops
Adjust the effective stroke on the fly for testing different material lengths in automated assembly fixtures.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-100 the Right Cylinder?
Choose this 32 mm bore when an application demands precise end-position tuning within a 500-600 mm travel range, stepping up from a smaller unit or down from a 40 mm bore that yields 628 N at 0.5 MPa if your payload requires less force. Because the stroke is 600 mm, the 12 mm rod needs external guiding to prevent excessive side-loading and premature seal wear. The rear adjuster acts strictly as a travel stop and does not hold the load without live air; for fail-safe load holding, consider an AirTAC SAIL or BSAI cylinder.
To match this ISO 15552 interchangeable cylinder, confirm the 32 mm bore, 600 mm stroke, 100 mm adjustment range, PT port thread, and SUS420J2 rod material. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets entirely.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-100 FAQ
At 0.5 MPa operating pressure, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. It can reach a maximum push force of 724 N at 0.9 MPa.
The rear adjuster screw allows you to mechanically shorten the 600 mm nominal stroke by up to 100 mm, creating a 500-600 mm usable travel window. It functions as a hard stop for end-position tuning and is not a locking device.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX600-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.