Airtac Adjustable Cylinder SAIJ32 SAIJ32AX650-10
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX650-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 650mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke650 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX650-10
The AirTAC SAIJ32X650-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that lets you dial in the exact end position. It provides a usable travel window of 640-650 mm, enabling fine-tuning without swapping components.
This variant features a SUS420J2 stainless steel rod for improved corrosion resistance and utilizes PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, though position sensing requires adding a magnet. The rear adjuster acts purely as a travel stop to decelerate the load, meaning it will not hold the load without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX650-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX650-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX650-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX650-10 Is Used
Machine Setup Tuning
Dial in the exact 640-650 mm retract position during initial commissioning without adding external shims or physical stops.
Product Changeover
Quickly adjust the stroke end-position by up to 10 mm on packaging lines when handling slightly different carton sizes.
Variable End-Stop Control
Fine-tune the travel limit on testing fixtures where a precise, adjustable mechanical end-stop is required for repeated cycles.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX650-10 the Right Cylinder?
If your application requires higher force, stepping up to the 40 mm bore provides 628 N. The 10 mm adjustment range is ideal for variable end-stops during product changeover. Because the 650 mm stroke is long, an external guide is recommended to prevent excessive side loading on the piston rod. For load-holding without live pressure, consider the SAIL or BSAI series instead of relying on the stopper.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX650-10 FAQ
The operating speed ranges from 30-800 mm/s.
The rear adjuster acts as a mechanical stop, allowing you to shorten the 650 mm nominal stroke by up to 10 mm, giving a usable travel window of 640-650 mm. It is a stop, not a lock, and will not hold the load without air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX650-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.