Airtac Adjustable Cylinder SAIJ32 SAIJ32AX700-10S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX700-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke700 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX700-10S
The AirTAC SAIJ32X700-10-S is a double-acting, single-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 690-700 mm usable travel window by allowing you to dial back the 700 mm nominal stroke by up to 10 mm. Delivering 402 N of push force at 0.5 MPa, it uses a PT tapered port and a SUS420J2 stainless steel piston rod (code A) for enhanced corrosion resistance.
This model includes a magnet (-S) for position sensing with CMSE reed or DMSE electronic solid-state switches. The extruded aluminum barrel features sensor grooves on both sides. The rear adjuster acts strictly as a travel stop for end-position tuning, meaning it will not hold a load without live air pressure. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX700-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX700-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX700-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX700-10S Is Used
Machine Changeovers
Fine-tune the 690-700 mm end position during product size changes without physically swapping out the cylinder.
End-Stop Calibration
Dial in the exact retract position during commissioning using the rear screw, avoiding the need for external mechanical stops.
Conveyor Diverter Setup
Adjust the stroke window on the fly to accommodate varying package sizes on a sorting line.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX700-10S the Right Cylinder?
Choose this 32 mm bore when your application requires 402 N push force at 0.5 MPa (or 563 N at 0.7 MPa). If you need higher force, stepping up to the 40 mm bore yields 628 N at 0.5 MPa. The adjustable stroke is ideal for machine setup and product changeovers, letting you fine-tune the end position without swapping the cylinder or adding external stops. For load-holding without live air pressure, consider the SAIL or BSAI series instead. Because the 700 mm stroke is long and unsupported, an external guide is recommended to manage side loads. To replace an ISO 15552 cylinder, match the 32 mm bore, 700 mm stroke, 10 mm adjustment, PT port, and mounting style.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX700-10S FAQ
At 0.5 MPa it provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force increases to 563 N.
The rear adjuster acts as a travel stop, allowing you to shorten the 700 mm nominal stroke by up to 10 mm, giving a usable travel window of 690-700 mm. It is not a lock and cannot hold a load without air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX700-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.