Airtac Adjustable Cylinder SAIJ32 SAIJ32AX700-20S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX700-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke700 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX700-20S
The AirTAC SAIJ32X700-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 680 to 700 mm usable travel window, allowing you to dial back the end position by up to 20 mm during commissioning without swapping hardware.
This unit features a SUS420J2 stainless steel rod for superior corrosion resistance and includes a magnet for position sensing. The extruded aluminum barrel integrates sensor grooves on both sides, directly supporting AirTAC CMSE reed and DMSE electronic solid-state switches. Pneumatic connections use PT tapered threads, and variable air cushions at both ends manage end-of-stroke deceleration.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX700-20S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX700-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX700-20S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX700-20S Is Used
Machine Changeover
Quickly fine-tune the 680-700 mm retract position when switching product sizes on a packaging line, avoiding mechanical rebuilds.
End-Stop Calibration
Dial in the exact end position during commissioning to perfect tooling alignment without fabricating custom spacer shims.
Variable Length Diverter
Adjust the stroke window on a sorting diverter to handle varying package lengths on the fly without changing the cylinder.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX700-20S the Right Cylinder?
The adjustable stroke is ideal for product changeovers on a line, letting you fine-tune the retract stop without adding external physical stops. Remember that the rear adjuster is a travel stop, not a lock—it will not hold the load without live air. For secure load-holding without pressure, consider an external rod lock or the AirTAC SAIL series.
As a dimensionally interchangeable ISO 15552 cylinder, replacement requires matching the 32 mm bore, 700 mm stroke, 20 mm adjustment range, PT port threads, and the -S magnet. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. Because the 700 mm stroke is long relative to the 12 mm rod diameter, an external guide is highly recommended to prevent excessive side-loading and premature seal wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX700-20S FAQ
At the maximum 1.0 MPa pressure, it delivers up to 82 kgf.
The rear adjuster acts as a stopper that lets you shorten the effective stroke by up to 20 mm, creating a 680 to 700 mm travel window. It sets the end position but does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX700-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.