Airtac Adjustable Cylinder SAIJ32 SAIJ32AX75-30S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX75-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 75mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke75 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX75-30S
The AirTAC SAIJ32X75-30-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the travel end-point. The integrated magnet enables position sensing with AirTAC CMSE reed and DMSE electronic switches.
This adjustable model provides a usable travel window of 45 to 75 mm, enabling rapid end-position tuning during commissioning or product changeovers without swapping the hardware. It shares the exact ISO 15552 mounting interface and extruded aluminum barrel of the fixed-stroke SAI series, but utilizes a reduced mounting accessory set (Basic, FA, LB, TC, FTC, TCM1, TCM2) to accommodate the rear stopper mechanism.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX75-30S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX75-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX75-30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX75-30S Is Used
Product Changeovers
Dial in the exact 45 to 75 mm travel distance when switching between slightly different package sizes on a packaging line.
Machine Commissioning
Fine-tune the retract end-position during setup without machining external stop blocks or changing the cylinder.
Variable End Stops
Provides a flexible stroke window for assembly stations that need to adjust the pressing depth based on the component being loaded.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX75-30S the Right Cylinder?
The 30mm adjustment range is perfect for variable end-stops, whereas a fixed SAI cylinder is better for static, unchanging travel limits.
For direct ISO 15552 replacement, match the 32mm bore, 75mm nominal stroke, 30mm adjuster, PT port thread, and -S magnet requirement. Remember that the rear adjuster is a travel stop, not a lock; it cannot hold a load without live air pressure. For dead-fall protection, consider the SAIL or BSAI series.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX75-30S FAQ
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 75mm nominal stroke by up to 30mm. This creates a usable travel window of 45 to 75mm for precise end-position tuning without replacing the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX75-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.