Airtac Adjustable Cylinder SAIJ32 SAIJ32AX80-10
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX80-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 80mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke80 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX80-10
The AirTAC SAIJ32X80-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 80mm stroke that can be fine-tuned backward by up to 10mm, creating a 70-80mm usable travel window for precise end-position calibration.
This variant uses a SUS420J2 stainless steel piston rod for enhanced durability against minor moisture exposure. The extruded aluminum barrel includes sensor grooves on both sides, and the fluid port utilizes a PT tapered thread. The rear adjuster acts purely as a mechanical stop to set the travel end and does not lock or hold the load without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX80-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX80-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX80-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX80-10 Is Used
End-Position Tuning
Dial in the exact 70-80mm travel window during machine commissioning without swapping cylinders or adding external mechanical stops.
Product Changeover
Quickly adjust the retract end-position on packaging lines when handling slightly different package sizes or varying material thicknesses.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX80-10 the Right Cylinder?
The SAIJ32X80-10 is chosen over a fixed-stroke SAI when product changeovers require rapid, on-machine travel adjustments.
For an exact ISO 15552 replacement match, verify the 32mm bore, 80mm nominal stroke, 10mm adjustment range, PT port thread, and the absence of a magnet (-S). This cylinder operates at speeds of 30-800mm/s. Because the stroke is under 300mm, side-load stress is minimal, though long unsupported loads still need an external guide. Remember that the adjuster is a stop, not a lock; for load-holding without live pressure, consider the SAIL or BSAI series.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX80-10 FAQ
At 0.7MPa, the push force increases to 563N.
A rear adjusting screw acts as a mechanical stop, allowing you to shorten the 80mm nominal stroke by up to 10mm. This creates a 70-80mm usable travel window for precise end-position tuning. It does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX80-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.