Airtac Adjustable Cylinder SAIJ32 SAIJ32AX800-75
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX800-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 800mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke800 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX800-75
The AirTAC SAIJ32X800-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel anywhere within a 725 to 800 mm window.
Because the adjuster acts purely as a mechanical stop at the retract end, it does not hold the load without live air; for position holding, consider an external rod lock or the SAIL series. This 32 mm bore model operates at speeds of 30-800 mm/s and supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX800-75 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX800-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX800-75
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX800-75 Is Used
End-Position Tuning
Dial in the exact retract distance within the 725-800 mm window during commissioning to perfect product placement without external stopper blocks.
Line Changeover
Quickly adjust the stroke by up to 75 mm when switching between different product sizes on a packaging or sorting conveyor.
Machine Setup
Use the rear mechanical stopper to safely set the precise travel limit during initial machinery assembly and testing.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX800-75 the Right Cylinder?
The adjustable stroke is ideal for product changeovers, allowing you to shift the end position by up to 75 mm without swapping the cylinder or adding external stops.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 800 mm stroke, PT port thread, and the chosen mounting style. Since this unit features an 800 mm stroke, the 12 mm diameter rod and M10x1.25 rod thread will experience amplified side loads if the load is unsupported; always guide the load externally to prevent binding. Note that this configuration lacks a magnet, so CMSE or DMSE sensors cannot be used without specifying the -S option.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX800-75 FAQ
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw acts as a mechanical stop that lets you shorten the nominal 800 mm stroke by up to 75 mm, giving an effective travel window of 725 to 800 mm. It is a stop, not a lock, and cannot hold the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX800-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.