Airtac Adjustable Cylinder SAIJ32 SAIJ32AX85-10S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX85-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 85mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke85 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX85-10S
The AirTAC SAIJ32X85-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 85 mm stroke by up to 10 mm. This yields a precise 75-85 mm usable travel window, enabling exact end-position tuning at commissioning without swapping out the unit.
Built with a SUS420J2 stainless steel rod and PT tapered ports, this variant includes a magnet for CMSE reed and DMSE electronic sensors. The extruded aluminum barrel features sensor grooves on both sides, and the mounting interface supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 footprints, omitting FB and rear pivot options.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX85-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX85-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX85-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX85-10S Is Used
End-Stop Calibration
Fine-tune the 75-85 mm travel window during machine commissioning to perfect the retract position without adding external stopper blocks.
Product Changeover
Quickly adapt the cylinder's effective stroke on automated lines when switching to a slightly shorter product variant.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX85-10S the Right Cylinder?
Choose this 32 mm bore when a 40 mm bore's 628 N at 0.5 MPa would be excessive for your payload, but you need more precision than smaller compact cylinders offer. The 10 mm adjustment range is ideal for product changeovers where the exact retract position shifts slightly, saving you from machining external stops. To match an ISO 15552 replacement, verify the 32 mm bore, 85 mm stroke, 10 mm adjuster, PT ports, and the -S magnet requirement.
Because the stroke is under 300 mm, the 12 mm rod handles standard side loads adequately, though long unsupported loads still need an external guide. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true drop protection, consider an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX85-10S FAQ
The maximum thrust is 82 kgf at 1.0 MPa.
The rear adjuster screw lets you shorten the nominal 85 mm stroke by up to 10 mm, creating a 75-85 mm travel window. This stopper only sets the end position; it does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX85-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.