Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-10
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 95mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke95 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-10
The AirTAC SAIJ32X95-10 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 95 mm travel by up to 10 mm for a usable window of 85-95 mm. The PT tapered port threads match the standard G1/8 connection for this 32 mm bore.
Instead of adding external stops or swapping cylinders during commissioning, the integrated rear screw lets you fine-tune the retract end position directly. The extruded aluminum barrel includes sensor grooves on both sides, though this specific unit lacks a magnet for CMSE or DMSE switches. Note that the rear adjuster functions strictly as a travel stop and does not lock the load without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-10 Is Used
End-Position Tuning
Dial in the exact retract distance within the 85-95 mm window during machine commissioning to achieve precise positioning without external shims.
Product Changeover
Quickly adjust the stroke by up to 10 mm on a packaging line when switching to a slightly different product size, minimizing downtime.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-10 the Right Cylinder?
The adjustable stroke is ideal for machine setups requiring product-size changeovers without mechanical rebuilds. Because this is a 95 mm stroke, side-load risks are minimal, but always ensure the M10x1.25 rod thread is properly aligned. For load-holding without continuous air pressure, consider the SAIL or BSAI series, as the SAIJ adjuster is only a stop. Replacement requires matching the 32 mm bore, 95 mm stroke, 10 mm adjuster, PT G1/8 port, and standard mounting options like FA, LB, or TC.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-10 FAQ
The rear adjuster screw allows you to shorten the 95 mm nominal stroke by up to 10 mm, creating an adjustable travel window of 85 to 95 mm. It acts as a mechanical stop and does not hold the load without air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.