Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-20
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 95mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke95 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-20
The AirTAC SAIJ32X95-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 75-95 mm usable travel window.
This adjustable-stroke design allows you to fine-tune the retract end position during commissioning without adding external stops. The rear screw acts purely as a travel stop for deceleration, not a load-holding lock, and the extruded aluminum barrel includes sensor grooves on both sides.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-20 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-20
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-20 Is Used
End-Position Tuning
Dial in the exact retract distance within the 75-95 mm window during machine commissioning without swapping hardware.
Product Changeover
Quickly adjust the stroke by up to 20 mm to accommodate slight variations in product size on the line.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-20 the Right Cylinder?
Choose this 32 mm bore when an application requires precise end-position tuning within a 75-95 mm window. If your setup needs less force, stepping down is not an option in this series, but if you require higher thrust, a 40 mm bore provides 628 N at 0.5 MPa. Because the 95 mm stroke is under 300 mm, side-load stress is minimal, though an external guide is still recommended for heavy loads.
Select this adjustable model over a fixed SAI cylinder when machine changeovers demand variable end-stops. To match this ISO 15552 replacement exactly, specify the 32 mm bore, 95 mm stroke, 20 mm adjustment, PT port thread, SUS420J2 rod, and no magnet. For load-holding without live air pressure, consider an external rod lock or the SAIL series instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-20 FAQ
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw allows you to trim the nominal 95 mm stroke back by up to 20 mm, creating a 75-95 mm travel window. It functions as a stop for end-position tuning and does not lock the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.