Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-30S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 95mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke95 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-30S
The AirTAC SAIJ32X95-30-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel window from 65 to 95 mm without adding external stops. Equipped with a magnet for position sensing, it supports AirTAC CMSE reed and DMSE electronic solid-state switches in its dual-side sensor grooves.
This adjustable-stroke model features an SUS420J2 stainless steel rod (option A) for improved corrosion resistance and uses PT tapered port threads (G1/8). The rear adjuster acts purely as a mechanical travel stop to dial in the end position during commissioning or product changeovers. It does not hold the load without live air pressure; for fail-safe load holding, consider the SAIL or BSAI series instead.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-30S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-30S Is Used
End-Position Tuning
Dial in the exact retract distance within a 65-95 mm window during machine commissioning without swapping cylinders.
Product Changeovers
Quickly adjust the stroke stop on packaging lines when handling different package sizes or formats.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-30S the Right Cylinder?
The adjustable stroke is ideal for machine setups that undergo frequent product-size changeovers, eliminating the need to physically swap out a fixed-stroke SAI cylinder.
To match this ISO 15552 dimensionally interchangeable cylinder, specify a 32 mm bore, 95 mm stroke, 30 mm adjustment range, PT G1/8 port, and the -S magnet option. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the stroke is under 300 mm, side-load stress on the 12 mm rod is minimal, though external guides are still recommended for perfectly rigid payloads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-30S FAQ
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective stroke by up to 30 mm. This creates a usable travel window of 65 to 95 mm, letting you fine-tune the end position at commissioning without adding external stops.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX95-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.