Airtac Adjustable Cylinder SAIJ32 SAIJ32AX950-10S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX950-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 950mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke950 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX950-10S
The AirTAC SAIJ32X950-10-S is a double-acting, adjustable-stroke ISO 15552 profile cylinder. It features a 32mm bore, a 950mm stroke, and a rear adjuster screw that allows you to trim the effective travel back by up to 10mm, creating a precise 940-950mm usable window for commissioning without external stops. Equipped with a SUS420J2 stainless steel rod and a -S magnet, it integrates seamlessly with CMSE reed and DMSE electronic sensors for position feedback.
It utilizes PT tapered port threads (G1/8) and includes adjustable air cushions at both ends to decelerate the payload smoothly. The rear adjuster acts strictly as a travel stop, not a load lock, meaning live air pressure is required to maintain position.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX950-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX950-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX950-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX950-10S Is Used
End-Position Tuning
Dial in the exact retract stop within the 940-950mm window during commissioning without swapping out the entire cylinder.
Product Changeover
Quickly adjust the stroke end-stop on packaging lines when handling different product sizes on the fly.
Long-Travel Sorting
Drive long-travel sorting or diverting mechanisms where a 950mm reach and precise variable end-stops are required.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX950-10S the Right Cylinder?
Choose this 32mm bore model when an application requires a long 950mm travel distance but demands fine end-position tuning during machine setup or product changeover. Because the stroke is 950mm, an external guide is highly recommended to prevent excessive side-loading on the 12mm rod.
This SAIJ model is dimensionally interchangeable per ISO 15552 mounting-interface dimensions. To replace a cylinder, match the 32mm bore, 950mm stroke, 10mm adjustment range, PT G1/8 port, and -S magnet. The available mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2. For load-holding without live air pressure, this cylinder is insufficient; consider an AirTAC SAIL or BSAI series instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX950-10S FAQ
The rear adjusting screw acts as an external stopper that lets you shorten the effective travel by up to 10mm. This creates a 940-950mm usable stroke window, allowing for fine-tuning at commissioning without adding external stops.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX950-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.