Airtac Adjustable Cylinder SAIJ32 SAIJ32BX10-10
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32BX10-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 10mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke10 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX10-10
The AirTAC SAIJ32X10-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the travel window from 0 to 10 mm without external stops. It delivers 402N of push force at 0.5 MPa, making it suited for light-duty positioning. The extruded aluminum barrel includes sensor grooves on both sides, and this configuration features a SUS304 stainless steel rod and tapered PT ports.
The integrated rear adjusting screw acts as a mechanical stop to set the exact end-of-stroke position during commissioning. It does not lock the load without live air pressure; for true load-holding, consider the SAIL or BSAI series. This 32mm bore model uses an M10x1.25 rod thread and G1/8 porting, operating at speeds from 30 to 800 mm/s.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX10-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX10-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX10-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX10-10 Is Used
Precision Positioning
Dial in the exact 0-10mm travel window during machine commissioning to set precise end-stops for delicate picking operations.
Product Changeover
Quickly adjust the rear stopper to accommodate minor thickness variations when switching between product runs on a packaging line.
Light-Duty Clamping
Provides 402N of clamping force at 0.5 MPa with the flexibility to back off the stroke by up to 10mm for part tolerance differences.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX10-10 the Right Cylinder?
Choose this 32mm bore adjustable cylinder when your application requires exact end-position tuning at commissioning or during product changeover, avoiding the need to swap physical cylinders. If you need slightly higher force, stepping up to the 40mm bore yields 628N of push force at 0.5 MPa. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR. To match this configuration exactly, specify a 10mm stroke, 10mm adjustment range, PT tapered ports, SUS304 rod material, and no magnet.
Because the stroke is only 10mm, side-load risks are minimal, but always ensure the rod thread (M10x1.25) is properly aligned to prevent binding. The cylinder is dimensionally interchangeable per ISO 15552 standards.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX10-10 FAQ
The rear adjuster screw lets you shorten the effective stroke by up to 10mm, providing a usable travel window of 0 to 10mm. It acts as a mechanical stop for end-position tuning and does not hold the load without live air pressure.
At an operating pressure of 0.5 MPa, the SAIJ32X10-10 provides 402N of push force and 345N of pull force. It can reach a maximum push force of 724N at 0.9 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX10-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.