Airtac Adjustable Cylinder SAIJ32 SAIJ32BX105-10
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32BX105-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 105mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke105 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX105-10
The AirTAC SAIJ32X105-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the travel window from 95 to 105 mm during machine commissioning. Delivering 402 N of push force at 0.5 MPa, it provides reliable linear motion for lighter-duty tasks.
This variant is configured with a SUS304 stainless steel rod for superior corrosion resistance and utilizes tapered PT G1/8 ports. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to easily mount CMSE reed or DMSE electronic sensors without extra brackets.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX105-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX105-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX105-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX105-10 Is Used
Changeover Dial-In
Fine-tune the 95-105 mm travel window during product size changeovers to set precise end positions without mechanical rework.
Light Assembly Pressing
Apply 402 N of push force at 0.5 MPa for accurate pressing and seating of small components on automated lines.
Diverting Stop Tuning
Adjust the retract stopper distance on the fly to perfectly position diverters or stops for varying package sizes.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX105-10 the Right Cylinder?
Choose this 32 mm bore when your application requires the 402 N push force at 0.5 MPa; stepping down to a smaller bore drops thrust significantly, while moving up to a 40 mm bore yields 628 N. The 10 mm rear adjustment screw is ideal for dialing in exact end-positions on product changeovers without swapping out the entire cylinder or adding bulky external stops.
Because the rear screw acts only as a travel stop and the air cushions manage end-deceleration, this cylinder cannot hold a load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series. As a dimensionally interchangeable ISO 15552 cylinder, it matches standard mounting footprints using the Basic, FA, LB, TC, FTC, TCM1, and TCM2 accessory set.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX105-10 FAQ
The nominal stroke is 105 mm, but the rear adjuster allows you to shorten the effective travel by up to 10 mm, creating a usable stroke window of 95 to 105 mm.
At 0.5 MPa operating pressure, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force, with a maximum thrust of 82 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX105-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.