Airtac Adjustable Cylinder SAIJ32 SAIJ32BX115-10
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32BX115-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 115mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke115 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX115-10
The AirTAC SAIJ32X115-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. By turning the rear stopper screw, you can trim the effective travel, creating a precise 105-115mm usable stroke window for exact end-position tuning.
This 32mm bore variant features a SUS304 stainless steel rod for superior corrosion resistance and carries a 12mm rod diameter with an M10x1.25 thread. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of position switches. It uses a reduced mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options found on other series.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX115-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX115-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX115-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×115 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX115-10 Is Used
End-Position Tuning
Dial in the exact 105 to 115mm retract distance during machine commissioning to perfect part ejection without physically remounting the actuator.
Product Changeover
Quickly adapt a packaging line for different carton sizes by turning the rear stopper screw to shorten the stroke on the fly.
Variable End Stops
Set precise mechanical limits for light-duty assembly presses where a fixed 115mm stroke would overtravel and damage delicate components.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX115-10 the Right Cylinder?
Choose this adjustable-stroke model when your machine setup requires fine-tuning the retract end-position during commissioning or product changeover without swapping out the physical cylinder or adding external stops. When matching this for an ISO 15552 replacement, verify the 115mm stroke, the 10mm adjustment range, PT port thread, and the lack of a magnet (-S). Because the stroke is 115mm, side-load risks are minimal, but always ensure linear guidance for heavy loads.
Remember that the rear adjuster functions strictly as a travel stop and works alongside the variable air cushions at both ends. It does not hold the load or maintain position without continuous live air pressure. For applications requiring true load-holding without air pressure, select an AirTAC SAIL pneumatic lock or BSAI clamp-lock cylinder, or integrate an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX115-10 FAQ
It features a rear adjusting screw that acts as a mechanical stop, allowing you to shorten the nominal 115mm stroke by up to 10mm. This creates a usable travel window of 105-115mm so you can fine-tune the end position at commissioning without changing the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX115-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.