Airtac Adjustable Cylinder SAIJ32 SAIJ32BX140-10
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX140-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 140mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke140 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX140-10
The AirTAC SAIJ32X140-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 130-140 mm usable travel window, allowing you to dial back the nominal 140 mm stroke by up to 10 mm during commissioning.
This variant uses a SUS304 stainless steel rod for superior corrosion resistance and features PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE electronic sensors if a magnet is added later. It supports a mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX140-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX140-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX140-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX140-10 Is Used
Machine Changeover
Dial in the 130-140 mm travel window during product size changes without physically replacing the cylinder or bolting on external stop blocks.
End-Position Tuning
Fine-tune the retract end position at commissioning to compensate for mechanical tolerance stack-up in the fixture.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX140-10 the Right Cylinder?
Choose this 32 mm bore adjustable model when you need precise end-position tuning without swapping cylinders or adding external stops. Because the rear adjuster acts only as a travel stop and the air cushions manage deceleration, this cylinder will not hold a load without live air—consider SAIL or BSAI variants for fail-safe load holding.
For an exact ISO 15552 replacement match, verify the 32 mm bore, 140 mm nominal stroke, 10 mm adjustment range, PT G1/8 port, and SUS304 (B) rod material. The standard speed range is 30-800 mm/s.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX140-10 FAQ
At 0.7 MPa, the push force increases to 563 N.
A rear adjuster screw lets you shorten the effective travel from the nominal 140 mm down to 130 mm. This creates a 130-140 mm usable window for fine-tuning the retract end position without changing the cylinder's physical mounting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX140-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.