Airtac Adjustable Cylinder SAIJ32 SAIJ32BX165-100
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32BX165-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 165mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke165 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX165-100
The AirTAC SAIJ32X165-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the nominal 165 mm travel back by up to 100 mm. This creates a highly flexible 65-165 mm usable window, enabling precise end-position tuning at commissioning without swapping the cylinder or adding external stops.
Built with a SUS304 stainless steel rod for superior corrosion resistance, this 32 mm bore unit integrates variable air cushions at both ends to manage deceleration. The extruded aluminum barrel includes sensor grooves on both sides for straightforward positioning feedback. It features PT tapered port threading and operates reliably at speeds between 30-800 mm/s.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX165-100 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX165-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX165-100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX165-100 Is Used
Machine Changeover
Dial in the exact retract distance from 65 to 165 mm during product size transitions without physically replacing the actuator.
End-Position Tuning
Fine-tune the final retract position at commissioning using the rear stopper to clear mechanical interference.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX165-100 the Right Cylinder?
Choose this adjustable-stroke model over a fixed SAI when your machine setup requires variable end-stops or frequent product-size changeovers, as the rear screw allows rapid fine-tuning of the retract position.
Because the 165 mm stroke is well below the 300 mm threshold, side-load risks are minimal, though an external guide is still recommended for heavy lateral loads. Remember that the rear adjuster acts strictly as a travel stop, not a lock; this cylinder will not hold a load without live air pressure. For true load-holding without continuous air, consider the SAIL or BSAI series. This SKU matches the ISO 15552 mounting interface, utilizing the SAIJ subset of mounts (Basic, FA, LB, TC, FTC, TCM1, TCM2) without any magnet specified.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX165-100 FAQ
The rear adjusting screw lets you shorten the 165 mm nominal stroke by up to 100 mm, creating a usable travel window of 65 to 165 mm. This stopper only sets the end position and does not lock the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX165-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.