Airtac Adjustable Cylinder SAIJ32 SAIJ32BX185-10
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32BX185-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 185mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke185 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX185-10
The AirTAC SAIJ32X185-10 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the 185 mm nominal travel by up to 10 mm. This creates a precise 175-185 mm usable window, letting you fine-tune the retract end position at commissioning without adding external stops.
Built with a SUS304 stainless steel rod, this version is well-suited for environments where corrosion resistance is a priority. The extruded aluminum barrel features sensor grooves on both sides, and while this specific SKU lacks a magnet, adding one enables the use of AirTAC CMSE reed and DMSE electronic sensors.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX185-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX185-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX185-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×185 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX185-10 Is Used
End-Position Tuning
Dial in the exact retract distance within the 175-185 mm window during machine commissioning to achieve perfect alignment without swapping cylinders.
Product Changeover
Quickly adjust the rear stopper by up to 10 mm to accommodate slightly different product sizes on a packaging or handling line.
Corrosion-Resistant Actuation
Leverage the SUS304 stainless steel rod in light manufacturing tasks where moisture or mild corrosive elements are present.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX185-10 the Right Cylinder?
The adjustable stroke is ideal for machine setups requiring variable end-stops or product-size changeovers. To match this cylinder for an ISO 15552 replacement, confirm the 185 mm stroke, 10 mm adjustment, PT tapered port thread, and your required mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the stroke is under 300 mm, side-load stress on the 12 mm rod is minimal, though external guides are still recommended for heavy lateral loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX185-10 FAQ
The rear adjuster acts as a mechanical stop, allowing you to shorten the 185 mm nominal stroke by up to 10 mm, resulting in a 175-185 mm travel window. Note that this adjuster is a stop and not a lock; the cylinder requires live air to hold its position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX185-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.