Airtac Adjustable Cylinder SAIJ32 SAIJ32BX185-75
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32BX185-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 185mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke185 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX185-75
The AirTAC SAIJ32X185-75 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 185 mm stroke that can be fine-tuned down by up to 75 mm, creating a usable travel window of 110 to 185 mm.
This adjustable-stroke design allows you to dial in the exact retract end-position at commissioning without swapping the cylinder or adding external stops. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX185-75 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX185-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX185-75
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×185 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX185-75 Is Used
Product Changeovers
Quickly modify the retract end-stop by up to 75 mm to accommodate varying package lengths on a packaging line without changing hardware.
Machine Setup
Fine-tune the 185 mm stroke during initial commissioning to achieve exact positioning, eliminating the need for external mechanical shims.
Variable End Stops
Ideal for test fixtures requiring a flexible 110-185 mm travel window to test different component sizes or actuation depths.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX185-75 the Right Cylinder?
Choose this 32 mm bore when you need precise end-position tuning within a 110-185 mm travel window. The generous 75 mm adjustment range is ideal for machines handling frequent product-size changeovers, replacing the need for fixed-stroke SAI cylinders when exact end stops fluctuate.
For an exact ISO 15552 replacement, match the 32 mm bore, 185 mm stroke, 75 mm adjustment, PT port thread, and SUS304 rod material. Note that this model lacks a magnet, so position sensing requires adding an -S suffix to use CMSE reed or DMSE electronic switches. Because the stroke is under 300 mm, side-load risks are moderate, but external guides are still recommended for unsupported loads. For load-holding without live air, consider an external rod lock or the SAIL series instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX185-75 FAQ
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw allows you to reduce the nominal 185 mm stroke by up to 75 mm, providing an effective travel range of 110 to 185 mm. It functions as a mechanical stop and does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX185-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.